Do you have the same question? Follow this Question
Apr 08, 2024 - 04:59 PM
We’ve provided several answers to questions related to Power Vision 3 for Can-Am Outlander , see some other helpful Q&A related to this product.
Question: Une date pour r�approvisionner
Answer: Hi Jonathan,
The part number has been updated to PV3-2510C and they are in stock ready to ship
https://www.dynojet.com/power-vision-...
Question: I have a 2021 outlander 650 xt there is no option? do i select one thats under 2023??
Answer: Hello Oliver,
The Power Vision 3 is not compatible with the 2021 Outlander 650 XT, you would need a Power Commander 6, specifically PC-25027. For further questions please reach us directly at pstech@dynojet.com
Question: Does it come preloaded with tunes?
Answer: Hello Jim,
The Power Vision 3 does have our tunes preloaded. For further questions please reach us directly at pv3tech@dynojet.com
Question: I?ve got a yoshimura slip on exhaust and not sure which tune to use on my 2023 1000 XMR Outlander
Answer: Hello Andrew,
For help selecting a tune please reach us directly at pv3tech@dynojet.com
Question: Does this tuner work with a mac or only windows platform ?
Answer: Hi Ronnie, thanks for asking. The PV3 uses powercore software which is only compatible with Windows at this time.
Question: Bought dual empire exhaust for my 2022 outlander Xmr and dyno vision but when I run it in sport mode goes in to limp mode and tried to download tune for dual exhaust and it won?t pop up on my dyno vision what am I doing wrong!
Answer: Hello Gage,
If you are having issues loading tunes onto your outlander please reach us directly at pv3tech@dynojet.com
Question: Do yall have tunes for the 2023 can am renegade 650 xmr?
Answer: Hi Jordan,
all available tunes can be found on our website under the tunes tab on the banner at the top of the page, for further assistance please reach us directly at pv3tech@dynojet.com
Question: looking to get a pv3 and have a 2023 outlander max xt 1000 with yoshi slip on..are tunes available for the 2023s yet?
Answer: Hello Dane,
All available tunes are currently listed on our website under the "tunes" section. For help selecting a tune please reach us directly at pv3tech@dynojet.com
Question: Just received my pv3 hooked up to ecu port to my 2022 can-am outlander 450 turned on the key pv3 powered up and said not paired need help Thanks.
Answer: Hello Gerard,
For pairing issues like this please reach us directly at pv3tech@dynojet.com so we may provide "live" support.
Question: Can I still use different drive modes ( Work, Normal, Sport) on a 2022 can am outlander 1000r xt after the tune?
Answer: Hello Derek,
You can still use the different drive modes with the PV3, for further questions please reach us directly at pv3tech@dynojet.com
Question: I have a 2022 can-am outlander 450 g2l with a mbrp slip on exhaust, your site says it will work with my 4 wheeler will the PV3 come with tunes already installed?
Answer: Hi Gerard,
Thank you for your inquiry.� We appreciate your interest and support for Dynojet products.�The PV3-25-10 does already come with preloaded tunes. Please reach our Technical Team directly at PV3tech@dynojet.com if you have further questions.
Question: Is it possible to get a refund after use of tunner?
Answer: Hello Ol,
Our return policy as stated on the invoice is 30 days from original purchase and any returned product must be unused. For further questions please reach us at returns@dynojet.com
Question: I have a 2021 can am renegade 650 XMR will this work
Answer: Hello Deon,
Your vehicle must be drive by wire to be compatible with the Power Vision, for further questions please reach us directly at pv3tech@dynojet.com
Question: Will the tune help the engine run cooler?
Answer: Hello Duncan,
The Power Vision 3 Allows the fan to turn on sooner allowing the engine to run cooler. For further questions please reach us at pv3tech@dynojet.com
Question: What tune should I use for dual empire slip on exhaust. This is for a 2020 Canam Renegade 1000 XMR.
Answer: Hello Peyton,
For help with tune selection please reach us directly at pv3tech@dynojet.com
Question: I have a 22 renegade 850 , i recently purchased the dynojet, i dont know what tune i can use from your website as nothing says its for a 850 renegade. do i just download the outlander 850 tune?
Answer: Hello Richard,
For help selecting Power Vision tunes please reach us directly at pv3tech@dynojet.com
Question: Will this work on a 2023 850 xmr outlander ? Don?t know if the 2023 an 2022 are the same ecm
Answer: Hello Remmington,
The Power Vision 3 requires your vehicle to be drive by wire to be compatible. Please reach us directly at PV3tech@dynojet.com so we can confirm this about your vehicle.
Question: Hello I was wondering why this tuner does not work for my 2021 can am 570 xmr.
Answer: Hello Ramzey,
The Power Vision is only compatible with Drive by Wire Models of the outlander. For further questions please reach us directly at pv3tech@dynojet.com
Question: I have a 22 renegade 850 with itc throttle Will this work? I was looking at all the tunes and only saw tunes for the 1000 and outlander 850s. I also have a 22 outland 570xt. Could I use the same tuner with another license?
Answer: Hello Richard,
This Power Vision is compatible with both your 2022 850 and 570 XT and all you would need is an additional tune license. For further questions please reach us directly at pv3tech@dynojet.com
Question: Is this compatible with the 2023 can am outlander 850xmr
Answer: Hello Leighton,
This Power Vision is compatible with the 2023 model as long as it is drive by wire, for further questions please reach us directly at pv3tech@dynojet.com
Question: Once my computer has been reflashed is there a way to set it back to factory? 2022 xmr1000
Answer: Hello Jonathan,
With the Power Vision 3 you will be able to flash back to the stock tune. Please reach us at pv3tech@dynojet.com for further questions
Question: Hello, is this compatible with a 2022 Can-Am Outlander 570 XMR?
Answer: Hello Colby,
Your Outlander must be Drive By Wire to be compatible with the Power Vision 3, for further questions please reach us directly at pv3tech@dynojet.com
Question: I have a 2022 Can-am Outlander 1000 xmr. I bought an HMF exhaust, PV3 and tuen from them, but the tune doesn't show up when I connect to the bike. How can I correct this?
Answer: Hello Rowdy,
If no tunes are being displayed on your device please reach us directly at pv3tech@dynojet.com
Question: Why doesn't this fit the 2021 model 570 xmr outlander?
Answer: Hello Ramzey,
The Power Vision is only compatible with drive by wire models of the outlander. For further questions please reach us directly at pv3tech@dynojet.com
Question: Hello, I was wondering if this tuner would fit a 2021 can am outlander 570 xmr and if it doesn't fit why not
Answer: Hello Ramzey,
The Power vision is designed for drive by wire vehicles. If your vehicles is not DBW this will not be compatible. For further questions please reach us directly at pv3tech@dynojet.com
Question: Why doesn't this work for the 2021 can am 570 xmr and and only works on the 2022 570 xmr
Answer: Hello Ramzey,
If your 570 Xmr is Drive by wire, this will be compatible with you vehicle. For further questions please reach us directly at pv3tech@dynojet.com
Question: Can this be used for a 2018 Maverick Trail 1000 DPS if I buy another license and get the tune for that machine?
Answer: Hello Dan,
For this unit to work on a 2018 Maverick Trail 1000 DPS you would need an addition tune license and a separate diagnostic cable, SKU# 76950961, which is available on our website. For further questions please reach us directly at pv3tech@dynojet.com
Question: Will this work on a 2022 Can Am Renegade 850 Xxc ( it does have ITC ) I don't see my model listed .
Answer: Hello Brian,
If your Renegade has ITC and is drive by wire then the PV3 will be compatible, please reach us at pv3tech@dynojet.com if you have any further questions
Question: Does this come with any sort of mount to attach it to the handle bars?
Answer: Hello Trevor,
The Power Vision claw mount, SKU# 61300079, is able to mount to any handlebar GoPro mount, If you have any other questions please let us know.
Question: Does this work with a can am xmr 650 2022
Answer: Hello Jose,
The Power Vision 3 is not confirmed to fit the 2022 Can-Am 650 X mr, if you have any further questions please reach us directly at pv3tech@dynojet.com
Question: This states it works for 2018 bikes and newer, but after reading a few things it seems the first year it supports is a 2020. I have a 2019 OUTLANDER 850, will the PV3 work with this bike?
Answer: Hello Conner,
As long as you Outlander 850 is drive by wire the Power vision will be compatible, otherwise you will need to use a Power Commander V. For any other questions please reach us directly at pv3tech@dynojet.com
Question: So I know other people have asked the question of the 2022 Can Am Outlander 570 XMR. It has the same diagnostic port as the rest of the can am?s. Is there any way I can be the first to get my model tested and tuned. Also my other question is there a way when I hook it to my system if it?s compatible I can tune it myself through the software, will this work?
Answer: Hello Ayden,
Even though they have the same diagnostic port we are unable to verify it will work with the ECU until we test it at our own facility. For further assistance please reach us directly at pv3tech@dynojet.com.
Question: will this work with a 2021 570 xmr
Answer: Hello Madden,
As it turns out this is not verified to work on the 570 X mr, we do have a Power Commander available though SKU#25-026. If you have any other questions please reach us directly at pstech@dynojet.com.
Question: Will this work on an outlander 850xmr with a rjwc exhaust if so which time is best for it
Answer: Hello Brayden, This will work on 2018-2022 drive by wire models of the 850, for more questions please reach out to us directly at pv3tech@dynojet.com
Question: Does the PV3 automatically come with the 2 basic tunes for a stock and aftermarket exhaust or do we have to download on ourselves?
Answer: Hello James, once the PV3 connects to your vehicle it will read your ECU and display all compatible tunes for your Outlander. Please feel free to reach out to us directly at pv3tech@dynojet.com for more assistance.
Question: Will the tuner work on my 2016 canam renegade 1000 xxc
Answer: Hello CJ,
This Power Vision will not work on your renegade, but we do have a Power Commanders available, SKU# 25-030, for further assistance please reach out to us at pstech@dynojet.com
Question: Which tune will work with a yoshimura exhaust? 2021 outlander xmr 1000.
Answer: Hello Westin,
Thank you for your interest in our products. The pre-developed tunes on Dynojets? website and on the Power Vision unit were created on a Dynamometer at our facility in Las Vegas Nevada. These tunes were created with the vehicle model listed, with the modifications listed. Unfortunately, there is no way for us to have a pre-developed map with every possible aftermarket component and configuration. If there is not a tune listed for your exact configuration, select a tune with similar aftermarket components. If you have an aftermarket slip-on type exhaust, then select a tune with a similar slip-on exhaust. If you have an aftermarket full exhaust, select a tune for a similar full exhaust. If you have an aftermarket air cleaner, select a tune with an aftermarket air cleaner. The tune created for one vehicle should work pretty well for a similar vehicle, with similar aftermarket components installed. for more information you can reach us direct at (800)992-4993 or pv3tech@dynojet.com.
Question: Whats the difference between 2510001, 2510002, and 2510101 for the outlander xmr 1000?
Answer: Hello Westin,
Thank you for the inquiry. Our device is designed so that you cannot send an incorrect tune to the ECU. To do this, we look at the ECU tune compatibility and checksum. Manufacturers can have many revisions in their ECUs and each time they do this, these values can change. We see lots of different variations.
When we develop a tune, it is done on a particular tune compat / checksum. This is the first set of values in each tune description. We then need to modify all the other stock files accordingly. This is why you see several tunes with the same notes but you will notice that the tune compat / checksum is different. When you connect to your vehicle it will ONLY show the tunes that match your ECU. For more information you can reach us direct at (800)992-4993 or pv3tech@dynojet.com.
Question: Will the powervision 3 tuner work with an rjwc exhaust for a 2021 outlander xmr 1000
Answer: Hello Hunter,
Yes the Power Vision 3 will work on your 2021 Outlander Xmr 1000 with an RJWC exhaust.
If you have any further inquiries, please contact us directly by phone at 1-800-992-4993 or email reply at pv3tech@dynojet.com.
We are available for Tech assistance M-F 8am-5pm Pacific Time.
Powersports Technical Support
Dynojet Research, Inc.
Free: (800)992-4993
Question: I have a 2021 Can Am Outlander Max 1000R XTP with an HMF Performance slip on and the K&N air filter. I currently have the powervision. What tune would you recommend?
Answer: Hello Randy,
Thank you for your support of our products. To get the best help with your tune request, please reach us directly at (800)992-4993 or pv3tech@dynojet.com. We are here Mon-Fri 8am-5pm PST.
Question: Can this product also work for my 2021 canam outlander 450?
Answer: Hello Mason,
Thank you for your interest in our PV3. Unfortunately the PV3-25-10 will not work on the Outlander 450 because it does not have the Drive by Wire throtthle system. You will have to use the Power Commander V 25-025. For more information you can reach us directly at (800)992-4993 Mon-Fri 8am-5pm PST.
Question: Do you will have a pv3 for de outlander 850 2017 in the future?
Answer: Hello Pedro,
Thank you for you interest in the PV3. Unfortunately the PV3 will not be available for the 2017 Outlander 850 as it has a drive by cable throttle system, and the PV3 works with vehicles that have drive by wire throttle systems. To adjust the fuel and ignition on your ATV you will have to go with the PCV 25-030. This is our piggy back style tuner that stays on the vehicle at all times.
Question: Hi I have a can am renegade 2020 european 650 XXc it has been modified to 840cc will the PV3 work on this model. I will be getting it setup on a dyno regardless.
Answer: Hello Alexander,
We have not been able to develop any tunes for this model as it is the only 650 that has the Drive By Wire system, and it has been a challenge for us to get in and test. Since we do not have any tunes available and you have done some extensive engine mods, you would have to get a custom tune made on a Dyno. You can always reach out to the Power Vision Tech Support team for more info and pv3tech@dynojet.com.
Question: Can you use this to flash back to factory settings if needed?
Answer: Hello Nicolas,
Thank you for your interest in our PV3 flash tuning device. Yes once the PV3 marries to a vehicle it keeps the stock file that can flashed back at any time. For more information on the PV3 you can check out the Help Center link, https://dynojet.zendesk.com/hc/en-us, or you can reach out directly to (800)992-4993. We are here Mon-Fri 8am-5pm PST to help.
Question: Going over the questions I see the Power Vision 3 looks like it's only compatible with Can-Am's that have the Fly-By-Wire (Electronic Throttle Body), is this true and if so is there another model that I can flash my ECU with? I have a 2019 650 DPS.
Answer: Hello Fred,
Yes for the PV3 to work with a Can-Am atv it must have a drive by wire throttle system. Looking at our fitment guide your 2016 650 DPS has a cable system so it will need the PCV 25-027, https://www.dynojet.com/power-command.... This is a piggyback system that plugs inline with the ECU to adjust the Fuel and Ignition tables, but it does not flash the ECU. It can help with throttle response, added power, and cooler engine temperatures but it won't adjust the speed limiter. For more information on our products you can reach us at (800)992-4993 Mon-Fri 8am-5pm PST.
Question: Will it work with the new can am 2022 xmr 570 because it has itc
Answer: Hello Tyler,
At this time we have not had a 2022 model in for testing. Once we are able to get one in to R&D to confirm fitment we will release the PV3. If you sign up for our mailing list on our website, you will receive notifications when new products are released.
Question: Is the Power Vision 3 compatible for my 2021 Can Am Renegade 850 XXC?if not can you send me a link to what is.Thank you
Answer: Hello Matt,
For the PV3 to be able to work on the Can-Am ATVs they must have a Drive by Wire, DBW, throttle system. Can-Am was putting both the standard cable throttle and the DBW systems on the 850s depending on the trim package. Typically when they put the iTC, intelligent throttle control, on the ATV it is DBW. Check the throttle to see what kind of system your 850 has, if it's a cable it will be DBW and you can use the PV3-25-10. If it has a standard cable then it would need the PCV 25-030.
Question: Will this work for a 2021 XMR 850? I don't see any when I select 2021.
Answer: Hello Luke,
For a Can-Am vehicle to use the PV3 it must be a Drive by Wire , DBW, style throttle system. You can check the throttle and if a cable is coming off of it, it would be a DBW and can use the PV3. If it is a traditional cable then you would need the PCV. Can-Am was putting both systems on the ATV lineup so you will want to confirm what it has. Typically if the vehicles has the iTC, intelligent throttle control, it is a DBW system.
Question: What do I need to do to get the correct PV3 for my 2021 outlander 850 XT?
Answer: Hello Jeremy,
For a Can-Am vehicle to use the PV3 it must be a Drive by Wire , DBW, style throttle system. The 2021 Outlander 850 XT is showing to be a cable throttle system in our fitment guide so that would need the PCV 25-030. You can check the throttle and if a cable is coming off of it, it would be a DBW and can use the PV3. If it is a traditional cable then you would need the PCV. Can-Am was putting both systems on the ATV lineup so you will want to confirm what it has.
Question: will the 2020 Outlander 850 XMR power vision work for my 2020 Outlander 850 Max XT
Answer: Hello Nathan,
For the PV3-25-10 to work with your 2020 Outlander 850 Max XT it needs to have Drive-By-Wire, DBW, system on the ATV. Can-Am calls it the iTC or Intelligent Throttle Control, so if the ATV has that system the PV3 will work for you. If the ATV does not have a DBW then it will need the PCV 25-030.
Question: Can you adjust the idle rpm with this?
Answer: Hello Les,
Within the PowerCore software you can adjust the idle and the idle temp, during warm up to operating temp. This is a flash tuning device so anytime charges are made within a tune it will need to be reflashed to the ECU.
Question: Will the dynojet work with the 2022 can am xmr 1000R. Have the tunes changed from year to year on the 1000 Rotax engine.
Answer: Hello Trevor,
We have not a 2022 model Can-Am in to confirm fitment. Once we are able to test the new models we will update the fitment or release a new product. If you sign up for the Newsletter from the website you will be alerted of ne product releases.
Question: Is the pv3 compatible with my 2017 can am xmr 850?
Answer: Hello Eddie,
Unfortunately it is not compatible. The Power Vision 3 was developed for 2019-2021 Can Am Outlander/Renegade with Fly-by-Wire (Electronic Throttle Body).
Here is a direct link for the Power Commander modules for your ATV (if interested): https://www.dynojet.com/parts/can-am/...
Question: Will this work on my 2021 outlander xtp 1000
Answer: Hello Trevor,
Yes the PV3-25-10 will work for your Outlander 1000 XT-P. Once it is married to your ATV it will give you all the available tunes.
Question: It looks like you have a tune for Outlander 570. Will this work on an 2019 outlander 570 max t3? Thanks
Answer: Hello Tim, the tunes we've developed for the Outlander 570 will work on any model of the 570s. Researching the T3 model, it looks like a European model so the fuel tables will have to be adjusted to compensate the difference between the fuels.
Question: Will this work for my 2021 outlander XT 1000R
Answer: Hello Matt, So this PV3-25-10 will work for your 2021 Outlander XT 1000R. I have talked with the Tech Support team and they have been helping customers using this PV3 on their vehicles. We are working to update the website to reflect fitment.
Question: I have a 2021 Outlander XMR 850 how do i send in the ECM so i can get the PV3
Answer: Hello Chris, so the PV3-25-10 will work on the 2021 Can-Am Outlander 850 XMR model. We are updating the website, but I have confirmation from the Tech Team that it work. They have worked with customers using them on the 2021 models so you are good to go on this PV3!
View all Power Vision 3 for Can-Am Outlander Questions & Answers
