Answer
May 05, 2022 - 08:32 PM
Hello Jacob,
Below are all the Quick Shifter parts you need to add to your 2016 R1S with PCV already installed.
First you need to select an addition module to control the entire function of the Quick Shifter. Explanation below.
A Quick Shifter functions by momentarily interrupts either fuel or spark during a shift event. Since this bike has 8 injectors (4 upper and 4 lower) you need to add something to your system besides a PCV and QS Sensor to activate the shift interrupt. This can be done is 1 of 4 ways.
Add a Quickshifter Expansion Module. This unit attaches to the upper injectors and will interrupt fuel delivery from the upper injectors when the shifter is activated. This unit does nothing else. SKU: QEM-12 https://www.dynojet.com/quick-shifter...
Add a Secondary Fuel Module. This unit attaches to the upper injectors and will interrupt them when the shifter is activated, but will also give you full control of the upper injectors for tuning if desired. SKU: SFM-14 https://www.dynojet.com/power-command...
Add an Ignition Module. This unit allows full control of your timing by driving the coils directly. It will also allow the shift to happen by interrupting the spark. SKU: 6-127 https://www.dynojet.com/power-command...
Install a Stand Alone Ignition Shifter. This module does not need a PCV in order to function. It is a separate module that connects directly to the coils and the shift sensor, and will allow a shift interrupt event by interrupting spark. SKU: 4-140 https://www.dynojet.com/standalone-qu...
Once you have selected one of the modules above you will need all the parts below to complete your QS parts.
SKU: 4-130 QS Sensor: https://www.dynojet.com/quick-shifter...
SKU: 32104060 Shift Rod A: https://www.dynojet.com/quick-shifter...
SKU: 32104030 Shift Rod C: https://www.dynojet.com/quick-shifter...
NOTE: The shift rods we are recommending to use are test fitted for the Factory Rearset/Shift Rod. Please let us know of you have aftermarket rearsets.
If you have any questions, please contact us directly at 1800-992-4993 or pstech@dynojet.com. We are available for Tech assistance Monday to Friday 8am to 5pm Pacific Time.
Powersports Technical Support
Dynojet Research, Inc.
Free: (800)992-4993
Below are all the Quick Shifter parts you need to add to your 2016 R1S with PCV already installed.
First you need to select an addition module to control the entire function of the Quick Shifter. Explanation below.
A Quick Shifter functions by momentarily interrupts either fuel or spark during a shift event. Since this bike has 8 injectors (4 upper and 4 lower) you need to add something to your system besides a PCV and QS Sensor to activate the shift interrupt. This can be done is 1 of 4 ways.
Add a Quickshifter Expansion Module. This unit attaches to the upper injectors and will interrupt fuel delivery from the upper injectors when the shifter is activated. This unit does nothing else. SKU: QEM-12 https://www.dynojet.com/quick-shifter...
Add a Secondary Fuel Module. This unit attaches to the upper injectors and will interrupt them when the shifter is activated, but will also give you full control of the upper injectors for tuning if desired. SKU: SFM-14 https://www.dynojet.com/power-command...
Add an Ignition Module. This unit allows full control of your timing by driving the coils directly. It will also allow the shift to happen by interrupting the spark. SKU: 6-127 https://www.dynojet.com/power-command...
Install a Stand Alone Ignition Shifter. This module does not need a PCV in order to function. It is a separate module that connects directly to the coils and the shift sensor, and will allow a shift interrupt event by interrupting spark. SKU: 4-140 https://www.dynojet.com/standalone-qu...
Once you have selected one of the modules above you will need all the parts below to complete your QS parts.
SKU: 4-130 QS Sensor: https://www.dynojet.com/quick-shifter...
SKU: 32104060 Shift Rod A: https://www.dynojet.com/quick-shifter...
SKU: 32104030 Shift Rod C: https://www.dynojet.com/quick-shifter...
NOTE: The shift rods we are recommending to use are test fitted for the Factory Rearset/Shift Rod. Please let us know of you have aftermarket rearsets.
If you have any questions, please contact us directly at 1800-992-4993 or pstech@dynojet.com. We are available for Tech assistance Monday to Friday 8am to 5pm Pacific Time.
Powersports Technical Support
Dynojet Research, Inc.
Free: (800)992-4993
