Answer
Jan 18, 2022 - 11:29 PM
Hello Javier,
Thank you for your support of our products. With the 2021 HD models and the PV-3B you are able to perform the standard Autotune Basic sessions. You can also connect an Autotune Pro module to perform wideband Autotune sessions with the PV. At this time, we am unsure as to whether we will be offering Target Tune kits for these motorcycles.
To use Autotune Pro there is one current issue...there are no adapters or Y-cables for these motorcycles to power the Autotune module currently available. All this module needs is a good, switched 12v power source and a solid ground. There are currently 3 options:
1. Buy and use the AT-300 kit, with a 72" CAN cable (76950427). The AT-300 kit doesn't come with a diagnostic port connector at the end of the power wires. There are simply 2 wires to be run to a switched 12v power source and a solid ground. (https://www.dynojet.com/autotune-for-... + https://www.dynojet.com/dynojet-can-l...)
2. If you already have the Autotune Pro kit with the diagnostic port connector, you can simply cut that connector off completely and the unit essentially becomes the AT-300 mentioned above.
3. If you already have the Autotune Pro kit with the diagnostic port connector, you can make some sort of adapter or run jumper wires from the power and ground pins of the connector to the appropriate power and ground locations on the motorcycle.
If you have any further questions you can reach us directly at (800)992-4993 or pvtech@dynojet.com
Thank you for your support of our products. With the 2021 HD models and the PV-3B you are able to perform the standard Autotune Basic sessions. You can also connect an Autotune Pro module to perform wideband Autotune sessions with the PV. At this time, we am unsure as to whether we will be offering Target Tune kits for these motorcycles.
To use Autotune Pro there is one current issue...there are no adapters or Y-cables for these motorcycles to power the Autotune module currently available. All this module needs is a good, switched 12v power source and a solid ground. There are currently 3 options:
1. Buy and use the AT-300 kit, with a 72" CAN cable (76950427). The AT-300 kit doesn't come with a diagnostic port connector at the end of the power wires. There are simply 2 wires to be run to a switched 12v power source and a solid ground. (https://www.dynojet.com/autotune-for-... + https://www.dynojet.com/dynojet-can-l...)
2. If you already have the Autotune Pro kit with the diagnostic port connector, you can simply cut that connector off completely and the unit essentially becomes the AT-300 mentioned above.
3. If you already have the Autotune Pro kit with the diagnostic port connector, you can make some sort of adapter or run jumper wires from the power and ground pins of the connector to the appropriate power and ground locations on the motorcycle.
If you have any further questions you can reach us directly at (800)992-4993 or pvtech@dynojet.com
