Question 1

how do I get the tune for a 2022 Low rider ST 117 ? View answer

Asked 2 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 2

After I perform the flash, does the tuner need to stay plugged into the UTV to work? View answer

Asked 2 ´years ago

Question 3

Just received my pv3 hooked up to ecu port to my 2022 can-am outlander 450 turned on the key pv3 powered up and said not paired need help Thanks. View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 4

Once I purchase the Power Vision 4 for my 2017 FLHXS, how do I purchase an additional license for my wife's 2018 FLHX? View answer

Asked 2 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 5

I have a 2006 yamaha warrior 1700 with twin turbos. I do not own a laptop and just got a PCV that I haven?t installed yet. Would the auto tuner eliminate the need to download any maps? Bike currently has a PC3 on it as well as a rising rate fuel regulator. Can?t find a shop willing to dyno tune the bike due to the turbos. View answer

Asked 2 ´years ago

Question 6

Can I use this on any stock or aftermarket turbo? View answer

Asked 2 ´years ago

Question 7

Stage 1 through Stage 3 modifications come with this kit and instructions? I'm putting on a Big Gun pipe and taking off the top of the air box. Instructions for the appropriate jets and needle settings are included with this kit? View answer

Asked 2 ´years ago

Question 8

Can I still use different drive modes ( Work, Normal, Sport) on a 2022 can am outlander 1000r xt after the tune? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 9

I have a 2006 kvf650d, My stock CDI has 3 harnesses, your picture of the dfs2-15 shows only 2. Will this fit my quad or do I need a different one? View answer

Asked 2 ´years ago

Question 10

Will this tune work on a 2023 xmr 570 with the detuned 650 engine View answer

Asked 2 ´years ago

Question 11

Cual es la varilla ideal para una kawasaki ninja 400 mod 2020 View answer

Asked 2 ´years ago

Question 12

Que codigo es la varilla que se necesita para la correcta instalacion de SENSOR DE CONTACTO DUAL QUICK SHIFTERSKU 4-130 View answer

Asked 2 ´years ago

Question 13

Will the power commander 6 be able to remove the rev limiter to a stock teryx 800 and change the top speed limiter as well. View answer

Asked 2 ´years ago

Question 14

What if the ECU already has a tune from previous owner? ECU has a custom tune from a company that no longer does tunes. Will the power vision work or does it need to be a stock ECU first? View answer

Asked 2 ´years ago

Question 15

I want to give it more air and run a Yoshi pipe. Are there instructions that make recommendations for that configuration? View answer

Asked 2 ´years ago

Question 16

What if I want to give it more air and put on a Yoshi pipe? Are there instruction that address that modification? View answer

Asked 2 ´years ago

Question 17

I have the power vision 4 will the power commander 6 work in conjunction wit it? And how View answer

Asked 2 ´years ago

Question 18

how do i find the right tune, no tune shows up for a 2020 mt-07 with a STAGE 2 KIT FOR 2014-2020 YAMAHA MT-07 or a full exhuast option View answer

Asked 2 ´years ago

Question 19

How do I figure out if I can fit it on my 2nd gen suzuki sv650 with aftermarket rear sets? I'm running a PC6. View answer

Asked 2 ´years ago

Question 20

What is the difference between the Strategy 27 and 28 Tunes? There are 2 identical tunes for my combo but one is a Strategy 27 and the other is a 28. Thanks - View answer

Asked 2 ´years ago

Question 21

is it possible to get just the studs? View answer

Asked 2 ´years ago

Question 22

I have a 2022 can-am outlander 450 g2l with a mbrp slip on exhaust, your site says it will work with my 4 wheeler will the PV3 come with tunes already installed? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 23

will this work on a 2021 turbo S? View answer

Asked 2 ´years ago

Question 24

I need a stage 2 kit for a 04 trx 450r does this kit include the stage 2 jet needed View answer

Asked 2 ´years ago

Question 25

does this model require a cable and laptop to adjust or program ? View answer

Asked 2 ´years ago

Question 26

Will one of the standard tunes run properly with a decat link pipe? View answer

Asked 2 ´years ago

Question 27

After the tune do I have to leave it hooked up? View answer

Asked 2 ´years ago | Power Vision 3 for 2001-2017 Harley-Davidson J1850 ECU

Question 28

Hello,is it possible to use this coils with the Dyna S DS2-1?Thank you and best regards,Daniel View answer

Asked 2 ´years ago

Question 29

At which temperature F does the display turn to red color? View answer

Asked 2 ´years ago

Question 30

I have 2022 sportsman highlighter 850 which tune would be best for my bike cause I don?t see my year model in the tune list View answer

Asked 2 ´years ago

Question 31

How hard is it to install the 02 sensor on an exhaust where there isn?t a spot for the 02 sensor View answer

Asked 2 ´years ago

Question 32

75. Shovel head, Dana S ignition white wire blue wire to coil where does the green wire from the tachometer attach to blue wire or white wire thank you. View answer

Asked 2 ´years ago

Question 33

will this also fit same year klx300 if used for off road purpose only? View answer

Asked 2 ´years ago

Question 34

This won?t blow a stock motor? Or will it? View answer

Asked 2 ´years ago

Question 35

If I upload already the calibration file . How can I edit the tune file? View answer

Asked 2 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 36

Didn't go down far enough on year, tried to cancel order but went through anyhow,,will a SKU# DC6-4 work on my 1948 distributor model ? View answer

Asked 2 ´years ago

Question 37

Will this be able to adjust Decel pop on a 2022 HD Sportster S (RH1250S)? View answer

Asked 2 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 38

What is the amp draw of this system when used with your dual output 3 ohm ignition coils? I'm converting to lithium battery and LED lighting. View answer

Asked 2 ´years ago

Question 39

Hello- I am looking to purchase a tuner that will provide up to 10HP with stock components, or at least up to 5HP. Can you tell me specifically how much HP will be added? I have a Can Am Maverick Trail 1000. Thanks! View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Maverick Trail/Sport

Question 40

I just received my PC6-22094 for my 2020 MT-03. I wanted to confirm that there is an autotune module that will work with it, and if so, is it single channel only, or can it do two channel?I'm building a turbocharged MT03, and was also curious if there's a minimum distance that the sensor can be from the exhaust port, as the primaries will be extremely short before they merge into the turbo manifold.Thanks! View answer

Asked 2 ´years ago

Question 41

Is there a pinout for this available? I don't have the original Igniter cable connector and so am having to redo it; I can't find anything online for a pinout to know what should go where for this device. I've also tried finding one for the original given its plug and play to no avail. View answer

Asked 2 ´years ago

Question 42

I have a factory original 2011 Handa CBR1000RR. I want to install a QUICK SHIFTER on it, what do I need to buy? View answer

Asked 2 ´years ago

Question 43

Will this increase my timing for low end torque on my 2019 Honda Pioneer 700? View answer

Asked 2 ´years ago

Question 44

Can you use this AutoTune device with the Power Commander "FC" on a KLX300 (dual sport model)? View answer

Asked 2 ´years ago

Question 45

just purchased 2014 MTS 1200s. Runs like it is very lean. Jerky pops back through throttle bodies etc. Will your product make this run as is should????????????? View answer

Asked 2 ´years ago

Question 46

Does this unit include fuel maps for KLX 250 bikes that have been upgraded with a 351 big bore kit? View answer

Asked 2 ´years ago

Question 47

Will this fit 1.5" bars? View answer

Asked 2 ´years ago

Question 48

Does this come with the rotor included ? View answer

Asked 2 ´years ago

Question 49

It seems that my 2&3 module has failed. It's 3 months past warranty can I just buy that one module or must I buy the whole package. I'm running dyna coils also View answer

Asked 2 ´years ago

Question 50

I have a 2004 Yamaha R6 and I just bought the dual-contact sensor, and Rod A. is this all I need? I already have a Power commander 6 installed for the sensor. I just need to make sure I have all the rods I need and I don't know if I need Rod D or not. View answer

Asked 2 ´years ago

Browse by Topic