Question 1

2007 vulcan classic 1600 - installed PC 5 with Cobra Speedster longs and BIG AIR ENFERNO from BARONS. Do i need to get it dyno'd or the PC5 has already been activated? View answer

Asked 3 ´years ago

Question 2

2002 honda shadow sabre with cobra dragster exhaust. The stock vt1100's run a main in the rear cylinder carb thats richer than the front cylinder carb. But it appears the instruction say to run the same size mains in both carbs. Am I understanding the instructions correctly? Please advise. Thank you! View answer

Asked 3 ´years ago

Question 3

Do this work for a 2021 iron 1200 ? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 4

does pv eliminates de 2 extra o2 sensors that newer harleys bring? im looking for a 2:1 exhaust that only has the normal 2, not 4 bungs... View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 5

Hello. Does this also fits KTM 690 SMC R 2020? is there any difference between this and the power commander for the KTM 690 SMC? I am looking at buying a used Power commander from a 701 SM 2017 and fit it to my SMC 2020 View answer

Asked 3 ´years ago

Question 6

Will this fit on a 2022 MT07? the only product for 2022 model year is the power vision 3. I am getting a full exhaust system and intake. View answer

Asked 3 ´years ago

Question 7

Hello, it is now end of May 2022, i see below someone asked 7 months ago if you have a download set up for a Akrapovic full exhaust. is there one now available? View answer

Asked 3 ´years ago

Question 8

Will this fit a 2020 Kawasaki Ninja 400 View answer

Asked 3 ´years ago

Question 9

Will this work on a 22 model? View answer

Asked 3 ´years ago

Question 10

Hello! I am very interested in fitting a quick shifter on my Honda 2015 cbr650f. However, I am a little bit confused as to what I need to buy. Is the "Quick Shifter Dual Contact Sensor" all I need, or is there any other parts?Thank you! View answer

Asked 3 ´years ago

Question 11

I do not see my year and model for the PV4. I have a 2010 Ultra Classic. It was tuned years ago with a Power Vision from the previous owner and now I am looking to upgrade it. Also, any dates on gauges and autotune? View answer

Asked 3 ´years ago

Question 12

Is there an ETA on when we can expect to start seeing additional functionality similar to previous models of PV on the PV4? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 13

WHERE CAN I FIND SOME MAPS FOR THIS THERE IS NONE ON YOUR WEBSITE THERE IS SOME FOR THE 300R BUT I DONT THINK THEY WILL WORK View answer

Asked 3 ´years ago

Question 14

I?m looking for a jet kit for a Mikuni Tm40 with accel pump that is on a Suzuki DR650. View answer

Asked 3 ´years ago

Question 15

I have a 2016 Harley Breakout FSXB. I installed the Power Commander V after I purchased it. Installed full headers and high flow intake. The PCV had me unplug the stock O2 sensors and block them off with plugs included in the kit. My headers have 18mm ports I believe with adapters reducing them to 12 mm for the stock sensors. Do you have to plug the stock sensors back in, AND add the 18 mm Wideband sensors with this kit? View answer

Asked 3 ´years ago

Question 16

Just to be sure, is the price for a single coil or do I need to buy one per cylinder?? Also, I understand they may be sold in California for race-only motorcycles if the buyer provides an attestation that the non-CARB parts will be used for off-road vehicles only. It is my understanding that other manufacturers do this routinely. Any reply will be greatly appreciated. Cheers! View answer

Asked 3 ´years ago

Question 17

Bonjour Je recherche un kit dynojet stage 2 pour Suzuki gsxf 600 de 2004 View answer

Asked 3 ´years ago

Question 18

Me and my friend has same bike, Honda CRF300 Rally. Can we use only one PowerVision3 to tune those both bikes ? View answer

Asked 3 ´years ago

Question 19

Will this plug work on a 2021 Klx300 dual sport? View answer

Asked 3 ´years ago

Question 20

What else do I need to put this on my 2016 polaris XPT 925cc with stock fuel pump, stock injectors, and black O2 sensor has the larger fan upgrade for radiator and silicone charge tubes, bov, aftermarket assassins slip on exhaust, and clutch? I want to be able to run 91 octane without mixing race fuel View answer

Asked 3 ´years ago

Question 21

Any chance on seeing a tune for aftermarket slip on exhaust like leovince?Thx,Doug View answer

Asked 3 ´years ago

Question 22

Hello, I have a 2022 Kawasaki klx 300r and I am looking to get your power commander V tune for it. I have been doing research with people installing different pipes like a pro circuit t-6 slip on, a delkovic slip on yourand also the recommended exhaust the FMF Q4 exhaust that you list on your website. I was wondering if your product will work with the pro circuit pipe or is their any underlying conditions with the tuner that it needs the FMF Q4? Thanks and have a great day. View answer

Asked 3 ´years ago

Question 23

do i need to purchase the power command v also with this kit or does it include it? View answer

Asked 3 ´years ago

Question 24

I have a 2 ki installed on a 1991 HD 1340 cc motor that is about 10 years old since a major rebuild. It has performed flawlessly for the last 10 years, and on starting motor yesterday all was good and i let it warm up for about 10 minutes, then shut it down. 20 Minutes later i tried to start bike and no go. I believe the ignition module make have failed. On troubleshooting i got to the point of no spark, and then pulled covers to access ignition module and coils. I have 12vdc on the white wire at the coil, however no green led light on power on, and no green led pulsing on cranking without plugs. Am i correct in assuming the module has probably failed? Any way to further diagnose the module? View answer

Asked 3 ´years ago

Question 25

Dimensions? View answer

Asked 3 ´years ago

Question 26

Can I use a map from 2020 on my 2022 harley View answer

Asked 3 ´years ago

Question 27

Hi, i have a Suzuki GSR 600 K7 and a PCV. I want to add a quickshifter. Which parts do i need for that? Thanks for your support. View answer

Asked 3 ´years ago

Question 28

Hello, I have a 2004 Yamaha R6 with a Power Commander 3, will this work with this power commander model or will a newer one be required? I was also wondering which shift linkage is needed since the stock linkage goes through the frame.Thanks View answer

Asked 3 ´years ago

Question 29

Will this work with Stage IV (131)? View answer

Asked 3 ´years ago

Question 30

PCV says it?s compatible with 2022 Harley road glide but there is no maps for the 107 engine View answer

Asked 3 ´years ago

Question 31

Will it work with klx 250? View answer

Asked 3 ´years ago

Question 32

What does "Lifetime Warranty" cover and how doe's it work? View answer

Asked 3 ´years ago

Question 33

I have a 2014 Triumph Commander. WIll this work on the 1700 Commander ? If so, how ? Since I am of the understanding that it's scu is locked. View answer

Asked 3 ´years ago

Question 34

I have a 2008 Yamaha R6 with PCV with adjustable aftermarket rear sets.What do I need to add a QS? View answer

Asked 3 ´years ago

Question 35

Hello im asking about your belts power series cvt belts!how does your belt compare to oem? I have a 17 can-am renegade 850cc.will i need to shim my clutches to run your belt?? I mean adjust my clutch to thickness of your belt to oem? Im a very xxxx my machine fast on off gas guy and hard torque pulls!! I noticed with oem i think it stretches over time and i get belt slippage less top speed over time. View answer

Asked 3 ´years ago

Question 36

Will this really not work on the 2020 Indian FTR 1200 Rally? I can find exhaust for my bike but no tuners. View answer

Asked 3 ´years ago

Question 37

Does this work with a can am xmr 650 2022 View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 38

Will this fit my 2009 Can am Renegade 500 and i have an HMF Slip on exhaust? Please let me know as soon as you can thank you very much. View answer

Asked 3 ´years ago

Question 39

Will this work with the PV3 for data logging? View answer

Asked 3 ´years ago

Question 40

Is this just one coil or a set of 4? View answer

Asked 3 ´years ago

Question 41

Will the z650 power commander work for the z650rs? View answer

Asked 3 ´years ago

Question 42

When will you make a stage 2 tune for 2022 honda groms for exhaust/intake/cam? View answer

Asked 3 ´years ago

Question 43

Does the power vision 3 allow you to adjust engine idle rpm? View answer

Asked 3 ´years ago

Question 44

Does the power vision 3 allow you to adjust engine idle rpm? View answer

Asked 3 ´years ago

Question 45

Hello Dynatek, i am looking for the correct igntion system for my bike (Harley davidson, softail Nostalgia, 1994 carb, ) i have been told that the nose cone part i need is the 2101-0027 part number, 2000i 1986-2003, but i am unsure which coil i need? if you could point me in the right direction i would be very grateful, i am looking for a single fire coil that i can mount in the original coil position on the softail. many thanks Simon. View answer

Asked 3 ´years ago

Question 46

Bought pv3 for honda cb650r 2021 but it does not recognize the ecu.help View answer

Asked 3 ´years ago

Question 47

Does this come with both stage 1 and 2 jets? View answer

Asked 3 ´years ago

Question 48

Hi will this work on a carbureted engine with electric ignition/cdi, if so what are the part numbers View answer

Asked 3 ´years ago

Question 49

This states it works for 2018 bikes and newer, but after reading a few things it seems the first year it supports is a 2020. I have a 2019 OUTLANDER 850, will the PV3 work with this bike? View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 50

Won't this work with the later/2020 models as well? If we can tune it ourselves the provided maps won't matter. I'm just concerned about it hooking up and communicating correctly. View answer

Asked 3 ´years ago

Browse by Topic