Question 1

I am thinking about running a Power Vision tune on my 2019 Can Am Outlander 850xmr with a stock exhaust. Would this be beneficial, and what are those benefits? View answer

Answer posted 3 years ago

Question 2

I currently have a power vision 3 for my 2018 polaris Sportsman XP 1000. Base on the fitment guide, this will fit my machine. However it says works with powervision but does specify powervision 3?Will this work with power vision 3? Also, will it "auto tune" to requested values I set in the tables on the fly? Or will I have to monitor and adjust each value individually based on the measured difference between request AFR and actual AFR?Thanks View answer

Answer posted 3 years ago

Question 3

Can you use this to flash back to factory settings if needed? View answer

Answer posted 3 years ago | Power Vision 3 for Can-Am Outlander

Question 4

Hello. I`ve bought AT-300 with 20-057 PCV. I can see 2 AFR from each cylinder, but Auto tune mode doesn`t run. View answer

Answer posted 3 years ago

Question 5

Can you tell me if this works on my 1994 Savage ? I think it works because the 2000-2005 carbs are the same as the 1994 i think it just changes the jet sizes . I really need more power specially on low RPM where i don?t have any torque if not can you please tell me why it doesn?t work ? Thanks View answer

Answer posted 3 years ago

Question 6

Will this work S&S107 single plug/ single fire,with kicker I have a dana2000i ign installed what coil do I need ? Is my stock is Dana 3oms #0504-1 coil work for single/plug. -single/ fire how to wire coil for this application ,plus kick start also,dip switch#6 up or down thanks David McMahon dm57panheads@gmail.com View answer

Answer posted 3 years ago

Question 7

Is there any way to get the 2201108 tune without the increased rev limit? View answer

Answer posted 3 years ago

Question 8

Are there any tunes for 2021 CB650R bike yet? any idea when they will be avaliable? View answer

Answer posted 3 years ago

Question 9

so if i have a power commander 5 with this i cant data log the o2? View answer

Answer posted 3 years ago

Question 10

Will this work on a Harley Softail flati Flsti? View answer

Answer posted 3 years ago

Question 11

I am intestested in buying the Power vision over the power commander for my Cb650r 2019 ABS, but I have a full akrapovic system on the bike, since there is no tune for that I am leaning towards the power commander instead. Is there any plan in the future to add tunes for different exhausts onto the power vision like the power commander has? View answer

Answer posted 3 years ago

Question 12

how well will it reflect the o2 readings of stock o2 sensors not sure if my bike is a wide or narrow 2014 cb1100 i think its a wide ban is it close enough to go by for tuning View answer

Answer posted 3 years ago

Question 13

I have a 1974 FLH with the points system I'm trying to get an electronic ignition will this work for me View answer

Answer posted 3 years ago

Question 14

Will this work on a Harley Davidson Road King. Stage 1 air cleaner, 2 into 1 Bassani B4 View answer

Answer posted 3 years ago | Harley-Davidson Power Vision for Delphi J1850 ECU Black

Question 15

Hi. Do you sell O2 sensor only? I have other product but my O2 sensor is missing. I have PC5 and Autotune and bike is suzuki vzr1800 View answer

Answer posted 3 years ago

Question 16

Good evening. I am curious of what size the jets are for this kit (both mains, Pilot jet, and air pilot). Additionally, what is the length of the needle set? I am looking to use this kit to rebuild my 2010 Yamaha Big Bear YFM400FWN 4WD. I tried to rebuild with a cheaper kit previously. It idles fine however cuts out when applying the throttle as if it isn?t getting enough gas. I have also tried to adjust the air mixture xxxx on the bottom of the mikuni carb. It helped the idling smooth out however still cuts out when increasing the throttle.Just want to make sure this will correct my problems before spending the $75. Thank you for the help and your time! View answer

Answer posted 3 years ago

Question 17

Can the fuel and boost model be used on a NA motor? View answer

Answer posted 3 years ago

Question 18

Can you leave it installed and mount somehow to the dash of a 2017 Honda pioneer 700. Will it display rpm on that machine? View answer

Answer posted 3 years ago

Question 19

Hello,I have a Honda CBR 600RR 2003 , i already have a PCV. I want add a QS.The only parts i need is the 4-130 sensor ? (with the the shift rod)Thanks View answer

Answer posted 3 years ago

Question 20

Hi, if a Power Vision 3 device is purchased, does it come with a license or do I need to purchase a licence? View answer

Answer posted 3 years ago

Question 21

I live in Las Vegas. If I brought my ecu to your HQ here would it be discounted because of not having to do shipping costs? View answer

Answer posted 3 years ago

Question 22

Can you please provide some information on what each of the 4 available tunes do? Thanks. View answer

Answer posted 3 years ago

Question 23

So is this just 100% tuned by the customer?Or is there a tune we can upload to the power commander, or like a guide as to what does what? View answer

Answer posted 3 years ago

Question 24

Going over the questions I see the Power Vision 3 looks like it's only compatible with Can-Am's that have the Fly-By-Wire (Electronic Throttle Body), is this true and if so is there another model that I can flash my ECU with? I have a 2019 650 DPS. View answer

Answer posted 3 years ago | Power Vision 3 for Can-Am Outlander

Question 25

Are these units preset to operate as a plug&play or will it need initial programing first? View answer

Answer posted 3 years ago

Question 26

So I wouldn?t need anything else for the pv3 to work properly? View answer

Answer posted 3 years ago

Question 27

Which flash would be the best one for me?I have european 2020 mt09, full Dominator exhaust and K&N air filter. View answer

Answer posted 3 years ago

Question 28

Hello, Just wanted to be sure that I checked the correct air filter in drop down option. I have the Indian stage 1 and clicked high flow. Is this correct. View answer

Answer posted 3 years ago

Question 29

Will this work on the pioneer 520? View answer

Answer posted 3 years ago

Question 30

What parts will this set include?Can you buy a set on your website with delivery to Russia? View answer

Answer posted 3 years ago

Question 31

do i need the pcv if i have the quickshifter expansion module ,sensor and shift rod for a 03 honda cbr600rr? View answer

Answer posted 3 years ago

Question 32

i have the quickshifter oem-12 sensor and shift rod , do i still need to use it in conjuncting with pcv? View answer

Answer posted 3 years ago

Question 33

I want to install this into my generator motor's distributor. It has a weighted advance addition already. Will it fit into a 1960s vintage distributor without any modifications to your plate diameter? View answer

Answer posted 3 years ago

Question 34

Can a DYNOJET dealer do the re-flash if I bring my bike to them? View answer

Answer posted 3 years ago

Question 35

Is this the same as the stand alone quickshifter (SKU# 4-139) in the way that it functions, just for 2 cylinder engines instead of 4? View answer

Answer posted 3 years ago

Question 36

what hp gains are you seeing on a rmax1000 View answer

Answer posted 3 years ago

Question 37

I have a 2018 xpt4 that I would like to upgrade the turbo on. Do you offer tunes for your turbo or do I need to take it to a tuner? Thanks View answer

Answer posted 3 years ago

Question 38

Hi, do you have dyno graphs or testing data? Really like this idea, just torn between your tunes or WSP or EVO.Thanks View answer

Answer posted 3 years ago

Question 39

What's the HP Gain? View answer

Answer posted 3 years ago

Question 40

The question from Larry on October 13th, your response was that there would only be the charge of shipping to and from to flash the computer to add for new cams being installed.On October 27th your response to Mark was that there would be a $199 charge and cost of shipping to and from to re-flash the computer to add for new parts.I'm confused as to which is correct. I'm wanting to make sure before ordering the flash for my 2021 Challenger Limited. View answer

Answer posted 3 years ago

Question 41

Will a Power Commander V for a 2020 Z650 work in a 2018 Z650? View answer

Answer posted 3 years ago

Question 42

Will this work on a 2018 Z650? View answer

Answer posted 3 years ago

Question 43

Do i have to buy two of them for my V-twin yamaha bolt? They said "single Channel" What does that mean? View answer

Answer posted 3 years ago

Question 44

Is the Kawasaki license for all kawi? I have KRX.Thank you View answer

Answer posted 3 years ago

Question 45

I read that with the Firmware-Updates for 2021 models it is not possible to tune an older bike. So my question is: Is it ensured that all Updates recommended by the Update-Client are compatible with my lizened bike or is it possible that the newest Update 2.2.01-1646 won't work on my 2015 TC103 any more ?Thanks! View answer

Answer posted 3 years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 46

I currently have a power vision 3 for my mt09, can I use the same cord for the mt10 or do I have to buy new cords. Also can I use the same device for different bikes? View answer

Answer posted 3 years ago

Question 47

I asked a question earlier about the shift rod but I forgot to mention that my power commander is a 3 with the number 315-410. The quick shifter would be this unit if you still sell them. View answer

Answer posted 3 years ago

Question 48

I own a 2004 Suzuki GXSR 1000 with your power commander. I?m thinking of purchasing a quick shifter. My question is what shift rod do you recommend? View answer

Answer posted 3 years ago

Question 49

Will this work with CDI ignition systems? View answer

Answer posted 3 years ago

Question 50

So, help me understand this? If both the PCFC and the PCV do basically the exact same thing and I can still download my own custom maps from my laptop for the PCFC, why would I spend twice as much for a PCV? View answer

Answer posted 3 years ago

Browse by Topic