Question 1

Dear Ladies and Gentlemen,I bought the PCV for my Yamaha XV 950 with the Vance and Hines Twin Slash Staggered exhaust and the VO2 air filter also from Vance and Hines. After loading and installing the New Map the machine starts, but the speed is only in the range between 700 and 800 rpm and the machine goes off again if I don't turn on the gas tap. The engine control lamp also lights up. As far as I know, I have connected all the cables as indicated in the instructions and now I do not know any more. Therefore, I ask for your help to solve my above mentioned problem. Thank you and best regardsJannis H�fel View answer

Asked 1 ´year ago

Question 2

Is it possible to ship to Korea? I'm trying to place an order, but the shipping fee is not being calculated. View answer

Asked 1 ´year ago

Question 3

Could you please tell me the difference between there two tuners, they both fit my machine.SKU#PV3-2516CSKU#PV3-2516Thank you?. View answer

Asked 1 ´year ago

Question 4

Hi i am wanting to get a PV3 for my 2022 TRX520FA6 but your website does not list this model is the trx520 pv3 and tune compatible ? View answer

Asked 1 ´year ago

Question 5

I running a PC6 on an 05 FXDWGI and looking to add an autotune kit Will this work? The description only refers to PC5.POWER COMMANDER AUTOTUNE FOR HARLEY-DAVIDSON WITH 4-PIN CONNECTORS (WITH O2 BUNGS)SKU#AT-100BThanks, Mark View answer

Asked 1 ´year ago

Question 6

Even though it says the PV3 fits a 2020 renegade 1000R XXC, Is there a better option View answer

Asked 1 ´year ago | Power Vision 3 for Can-Am Outlander

Question 7

After installing my Dynatek ignition can i remove my stock ignition module or does it control other things too 1994 Dyna ide Glide Thanks View answer

Asked 1 ´year ago

Question 8

Hi,I recently purchased a used 2013 Triumph Thunderbird Storm (1700 w/abs). I see a PCV is listed for this bike for 2010-2014 (SKU 21-001) but is discontinued and out of stock. But I also see SKU PC6-21019 (in stock) fits my bike for model years 2014-2015. So if a unavailable one fits my bike and is for 2010-2014 and available one also fits a 2014 I would think it may fit for my 2013? Please let me know if this PC6 would actually fit my 2013?Thanks, Scott View answer

Asked 1 ´year ago

Question 9

Can the four output coil (DC6-4) be used with points ignition for a dual plug conversion? View answer

Asked 1 ´year ago

Question 10

i have a 2005 zx10r and was thinking about getting a quick shifter, what other parts or rods would i need to do this? View answer

Asked 1 ´year ago

Question 11

It's a pretty good basic tuner if just doing Air and pipes. using a data logger and then making adjustments is long and tedious work, The Tune turned out really well. Not everyone is capable, just like not everyone has access to a Tuner with a Dyno or one that can be trusted! So where is the auto-tune feature? View answer

Asked 1 ´year ago

Question 12

Does this unit have access to pre configured maps or does it all have to be customized for a 2014 wildcat 4x? View answer

Asked 1 ´year ago

Question 13

Bought pv3 for Honda cb650rr 2023 but it does not recognize the ecu.please help View answer

Asked 1 ´year ago

Question 14

Do I need to purchase this to use the auto tune feature on a Power Vision 3 for a 2023 Honda CBR650R, or can the Power Vision 3 auto tune with stock o2 sensors? Thank you. View answer

Asked 1 ´year ago

Question 15

Does the Autotune basic available with harley MT22 ECU (model 2021.. with a 02 sensor attached into exhaust) ? View answer

Asked 1 ´year ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 16

Does this fuel controller have different maps stored in it? Like can I switch to a different map without having to connect my laptop to it? View answer

Asked 1 ´year ago

Question 17

I have purchased one of these from EuroBike in Australia, but I need coils. They were unsure how to respond to this questions so I am coming to the source. What are the best coils to use? If they are your coils, do you have an Australian distributor. View answer

Asked 1 ´year ago

Question 18

Is it water resistant View answer

Asked 1 ´year ago

Question 19

i would think so but would this work with a 2024 Honda Rubicon? it shows to work with a 2022 should be the same unless they encrypted it. View answer

Asked 1 ´year ago

Question 20

Will this work for a 2024 Honda Shadow aero with cobra intake and cobra exhaust? View answer

Asked 1 ´year ago

Question 21

I have a 2022 Suzuki Hayabusa and I bought the PCM V. Unfortunately, the motorcycle doesn't respond to tuning in any way. Since there's no map in your database either, I think you've come to the same conclusion. The 2022 Hayabusa is resistant to PCM V. Do you have any solution to this situation? I bought an expensive box that is completely useless. Will you refund my money? Or are you working on a solution to make PCM work? Thank you. View answer

Asked 1 ´year ago

Question 22

Does this quick shifter go up and down? View answer

Asked 1 ´year ago

Question 23

Will Power Commander 5 tunes work with Power commander 6? View answer

Asked 1 ´year ago

Question 24

i am opening new new tunning garage in Mongolia. Could you please suggest which dyno model should i use? and wondering is AWD dyno works on 2wd cars? View answer

Asked 1 ´year ago

Question 25

Am I able to plug the power vision? 3 into a 2023 can am Outlander 1000 R? And take these speed limiter off. And if so, how do I do it with the licenses? Because it was recently Paired to a Harley Davidson, Or a Honda one of those 2. View answer

Asked 1 ´year ago

Question 26

Will this work on my 09 crossfire 800 R sled? Just bought the PC6. View answer

Asked 1 ´year ago

Question 27

Will this PC help with throttle application? My throttle on my 2019 SV650 is very abrupt on/off when at low RPM in town. Its very hard to be smooth with the throttle. I would like to have the throttle respond like a cable operated one, not a fly by wire as it is.ThanksBilly View answer

Asked 1 ´year ago

Question 28

Hello!Please tell me , I own an XT660X 2013, can I put this commander ? 3 versions. I have Leo Vinchi, I just need to configure the fuel View answer

Asked 1 ´year ago

Question 29

Will this work with the factory ignition setup on my 1990 Yamaha FJ1200 View answer

Asked 1 ´year ago

Question 30

Does this module allow the bike to run with or without the factory security module in place? Building a chopper and i dont need all the extra xxxx . View answer

Asked 1 ´year ago

Question 31

Hello I am looking for a performance alternative to the stock single fire TI ignition on my 82 Honda Gl500 and noticed this says single fire and twin the stock Honda coils are 12volt 3ohm coils so would this be a working alternative View answer

Asked 1 ´year ago

Question 32

EL KIT VIENE PARA LOS DOS CARBURADORES O UNO SOLO? View answer

Asked 1 ´year ago

Question 33

Will this work with a 05 hayabusa with a power commander 5? Dual exhaust View answer

Asked 1 ´year ago

Question 34

Hello, I bought your system Dyna S Ignition System for 1970-2003 Harley-Davidson Carbureted Models - Single Fire for my client through the Custom Chrome Europe distribution network, I am asking for help on an issue such as: does this Dyna S Ignition System for 1970-2003 Harley-Davidson Carbureted Models - Single Fire have the ability to connect a tachometer?Best regardsMad Riders Poland View answer

Asked 1 ´year ago

Question 35

My dyno guy swears that the Power Commander V is better than the PC6. Is this true and what is the difference? Can I buy a Power Commander V from you? View answer

Asked 1 ´year ago

Question 36

I am looking at putting this on my Honda trx700xx. I already have a power commander 6 installed. Seeing as there is no o2 sensor on my exhaust, what procedure will I have to do to get this working? Thank you. View answer

Asked 1 ´year ago

Question 37

with PV4 can you turn up the rev and speed limiters? View answer

Asked 1 ´year ago

Question 38

I suspect the stock fuel control module on my 2011 BMW 1200GS is faulty. Does this unit (SKU PC6-12014) bypass the fuel control module on my fuel tank? In other words, do I disconnect the stock unit and only use the DYNOJET in it's place? Thank you ! View answer

Asked 1 ´year ago

Question 39

Does this remove the top speed limiter on a 2014 CB1100? Or does it simply allow for control of the fuel/air mix? View answer

Asked 1 ´year ago

Question 40

do i need extension cable if the ports are closer to the front of the pipes? View answer

Asked 1 ´year ago | Target Tune for Harley-Davidson CAN ECU 10/10'' 4P

Question 41

regarding the PCFC FC20900 for the burgman 650 2015 . When i read the pdf install document on your site, it seems that there is only one map available for stock exhaust and stock air filter.(map selector on position 1) Is it possible ? I'm planning to buy this product because i will install a gpr complete line with cat and performance air filter... thank you. View answer

Asked 1 ´year ago

Question 42

Is there any way I can purchase the cable by its self? View answer

Asked 1 ´year ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 43

I'm wondering if this cable will work on my 2023 Nightster Special. View answer

Asked 1 ´year ago

Question 44

In description it states can be upgraded with Autotune feature, if thats the case am I able to use this unit and the Autotune unit together? If so how would I set that up? View answer

Asked 1 ´year ago

Question 45

Does this work with a MAC View answer

Asked 1 ´year ago

Question 46

I have a 02 gsxr750 I have a Annitori Quickshifter on it will the 2 work together and also it says that u have one tune available for it i hope there is more than that i don't have stock air or exhaust. thank you hope we can do business View answer

Asked 1 ´year ago

Question 47

Fitment lists the 2023 FXLRS but not the older models. Does it fit the 2018-2022 models as well? View answer

Asked 1 ´year ago

Question 48

Hi. Can I use it with Power Vision 4? View answer

Asked 1 ´year ago

Question 49

The rinehart mufflers you advertise on your video for the challenger, are they the classic's or the dbx 40's or the dbx 45's? View answer

Asked 1 ´year ago

Question 50

Silly question but do you have to remove the carbs to install this? View answer

Asked 1 ´year ago

Browse by Topic