Question 1

What is the difference between the Strategy 27 and 28 Tunes? There are 2 identical tunes for my combo but one is a Strategy 27 and the other is a 28. Thanks - View answer

Asked 2 ´years ago

Question 2

is it possible to get just the studs? View answer

Asked 2 ´years ago

Question 3

I have a 2022 can-am outlander 450 g2l with a mbrp slip on exhaust, your site says it will work with my 4 wheeler will the PV3 come with tunes already installed? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 4

Will one of the standard tunes run properly with a decat link pipe? View answer

Asked 2 ´years ago

Question 5

75. Shovel head, Dana S ignition white wire blue wire to coil where does the green wire from the tachometer attach to blue wire or white wire thank you. View answer

Asked 2 ´years ago

Question 6

will this also fit same year klx300 if used for off road purpose only? View answer

Asked 2 ´years ago

Question 7

Didn't go down far enough on year, tried to cancel order but went through anyhow,,will a SKU# DC6-4 work on my 1948 distributor model ? View answer

Asked 2 ´years ago

Question 8

Will this be able to adjust Decel pop on a 2022 HD Sportster S (RH1250S)? View answer

Asked 2 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 9

I just received my PC6-22094 for my 2020 MT-03. I wanted to confirm that there is an autotune module that will work with it, and if so, is it single channel only, or can it do two channel?I'm building a turbocharged MT03, and was also curious if there's a minimum distance that the sensor can be from the exhaust port, as the primaries will be extremely short before they merge into the turbo manifold.Thanks! View answer

Asked 2 ´years ago

Question 10

Is there a pinout for this available? I don't have the original Igniter cable connector and so am having to redo it; I can't find anything online for a pinout to know what should go where for this device. I've also tried finding one for the original given its plug and play to no avail. View answer

Asked 2 ´years ago

Question 11

I have a 2004 Yamaha R6 and I just bought the dual-contact sensor, and Rod A. is this all I need? I already have a Power commander 6 installed for the sensor. I just need to make sure I have all the rods I need and I don't know if I need Rod D or not. View answer

Asked 2 ´years ago

Question 12

Can I run these jets on my bike in the winter View answer

Asked 2 ´years ago | Jet Kit for 2010-2023 Kawasaki KLX110

Question 13

Does this work with power commander 6? View answer

Asked 2 ´years ago

Question 14

I have a 2022 KLX 140 RL. Just purchased a FMF full exhaust. Will be making modifications to air box. What jetting will I need. Normally ride under 2,000 feet elevation but do make a trip once a year to up to 8,000 feet elevation. Thank you. View answer

Asked 2 ´years ago

Question 15

I have Honda VT750CA Shadow Aero and I've installed a new exhaust vance and hines short shots. I've checked the power commander tuning files and I was able to only find the Stock exhaust Stock intake file. Can you help me understand if this will for my bike ? View answer

Asked 2 ´years ago

Question 16

Hay there~ Will the stand alone quickshifter, allow the bike to run, Aka will it allow power to travel through it for the coils or injectors if the box has no power supplied to it? Basically I'm asking it it has a normally closed circuit/switch/relay, on the kill side of the box?I would be using it on coils, and on the street. I'm considering powering it through a accessory switch.Thanks for your time! View answer

Asked 2 ´years ago

Question 17

Since there is no image and it is not explicitly stated. Does this set include two coils? What is included in this set? Thanks View answer

Asked 2 ´years ago

Question 18

I have a Dynojet PV3 that I had licensed and used on my previous CanAm X3. I have a new machine and want to purchase a new license and tune it but this product says that its (Not compatible with 2021+ RR Models). How can I use my existing PV3 to tune my machine? View answer

Asked 2 ´years ago

Question 19

will this let set the idle from the current 660RPMs to the factory 1400 rpms. seems a little high, but that is what the book says? View answer

Asked 2 ´years ago

Question 20

How is this different performance wise versus the pv3 model? Sku#PV3-29-01 View answer

Asked 2 ´years ago

Question 21

Hello, Does this work on the Honda PCX 125 2022? View answer

Asked 2 ´years ago

Question 22

Hi, can a shift rod type switch be used in a linear situation? Can I make a push sensor work on my ZX14R? Thanks View answer

Asked 2 ´years ago

Question 23

will the PC6 work on the 2020 superduke 1290r View answer

Asked 2 ´years ago

Question 24

I have 2023 mt09, I'd assume that this would fit the same. No changes to the engine as far as I am aware for the 2023 model. Can you use these modules to make it to where when you let off the throttle the bike doesn't just kill all fuel to the injectors. Preventing the bike from jerking you forward when you let off the throttle? View answer

Asked 2 ´years ago

Question 25

What stage is this kit. I am running a 2001 Honda VLX600 with a TJ Brutal velocity stack and 2" unbaffled straight pipes. Will this kit work? View answer

Asked 2 ´years ago

Question 26

Does this work with a 2022 Euro5 XSR 700? View answer

Asked 2 ´years ago

Question 27

is this the same unit as the pc 3 r? View answer

Asked 2 ´years ago

Question 28

I have an European mt09 2017, termignoni full system without catalytic converter and BMC air filter, do you guys have a map for me? Would it work on my European bike? Can I switch between the flashed map and the stock?? Because in Spain every 2 years I have to pass an inspection, so I would need to go back to factory settings?. Thank you View answer

Asked 2 ´years ago

Question 29

Will this work 2010FLSTC From data port to speedometer to transfer Data to new speedometer View answer

Asked 2 ´years ago

Question 30

Will this work on a 2015 Polaris Ace 325? View answer

Asked 2 ´years ago

Question 31

Can the person I purchased my PV-2B from buy the Unlock License and send it to me, or do I have to purchase it and hope he reimburses me? View answer

Asked 2 ´years ago

Question 32

Do it come with spark plugs wires View answer

Asked 2 ´years ago

Question 33

Will there be more tunes for the Sportster S? And the one time I can see on here, what exactly does it do VS stock? View answer

Asked 2 ´years ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 34

I have a pv3 that I purchased for 2021 Indian scout. I have since sold scout and purchased 2021 indian roadmaster. Does this reset to new so I can delete scout and use on road master or do I need to buy the indian tuning license to tune roadmaster? View answer

Asked 2 ´years ago

Question 35

It will work on power comammande 6? View answer

Asked 2 ´years ago

Question 36

Hello! I have a 2011 foreman 500, am I able to use this kit with stock air box/filter and stock exhaust? Would there still be a noticeable difference? Thank you View answer

Asked 2 ´years ago

Question 37

I bought my pv3 for my indian chief dark horse, however I also own a 2016 indian scout sixty, which I'd like to use it on. If I purchase credits, would this be possible? View answer

Asked 2 ´years ago

Question 38

Hi! I'm interested in Power Commander for Honda NC750X 2021. Do you have any possibility to make this product? View answer

Asked 2 ´years ago

Question 39

Bought dual empire exhaust for my 2022 outlander Xmr and dyno vision but when I run it in sport mode goes in to limp mode and tried to download tune for dual exhaust and it won?t pop up on my dyno vision what am I doing wrong! View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 40

Are there tunes for a 2022 HARLEY DAVIDSON Road Glide Special with a cam? View answer

Asked 2 ´years ago | Power Commander 6 for Harley-Davidson Touring

Question 41

Would this be suitable for a 2013 model or only the 2010 model? View answer

Asked 2 ´years ago

Question 42

Do I need to have a power commander already for this to work on my bike? View answer

Asked 2 ´years ago

Question 43

I have a PV3 for a Can Am Ryker, can I get a license and use the same PV3 for tune on a Can Am Renegade? View answer

Asked 2 ´years ago

Question 44

How does this compare to Power Vision Black? PV-2B View answer

Asked 2 ´years ago | Power Vision 3 for 2011-2019 Harley-Davidson CAN ECU

Question 45

Why is this not available for US purchase yet made in the US View answer

Asked 2 ´years ago

Question 46

Will this work on my fuel injected KLX250? View answer

Asked 2 ´years ago

Question 47

Are these jets good for pod filter upgrades? Also, do the jets in this kit come for all 4 carbs? View answer

Asked 2 ´years ago

Question 48

If I buy this, will I need anything else t tune my RH975, or is it all I need? View answer

Asked 2 ´years ago

Question 49

When will this PV4 be available for the 2022 Chief Dark Horse? View answer

Asked 2 ´years ago

Question 50

This item shows it?s interchangeable on other websites with Suzuki and arctic cat. Do you know if yours is? View answer

Asked 2 ´years ago

Browse by Topic