Question 1

Just to verify, this kit has BOTH coils? View answer

Asked 4 ´years ago

Question 2

Looking at this tuner and intake . But I looked through all the tunes that was available and did not see anything listed for the 116 with that intake and slip on pipes? View answer

Asked 3 ´years ago

Question 3

Does the flash eliminate the known throttle response lag on these bikes? also, does it eliminate or increase top end speed limiter? View answer

Asked 3 ´years ago

Question 4

When will there be stock available again? Can we pre order? View answer

Asked 3 ´years ago

Question 5

I have a 2015 Harley Davidson Street Glide CVO 110 with the 117 tire shredder kit installed. Do you have a map that will work for my setup? View answer

Asked 4 ´years ago

Question 6

2010 ducati hypermotard 796 it would be great if you can tell me what do i do about the stock wiring plugs, after install my bike threw a warning code, are the stock 02 sensors to be used as dummies and put on the exhaust to complete a loop, can you please clarify proper install procedure with regards to the stock plugs and sensors thank you View answer

Asked 3 ´years ago

Question 7

Does the ecu flash for the challenger eliminate the well known throttle lag response? And what will the new speed limiter be? View answer

Asked 3 ´years ago

Question 8

When will this product be available for purchase? View answer

Asked 3 ´years ago

Question 9

Hello. Do You have also application for 2018 version ?Some sources says 12-018 is workable, but not on Your websiteThank You in advance for reply View answer

Asked 4 ´years ago

Question 10

Does this require an O2 sensor or wideband sensor? For 2020 can am turbo rr xrs View answer

Asked 5 ´years ago

Question 11

I just want to confirm this will fit a 116 Thunderstroke and the 2021 Springfield has been unlocked? Also do you have maps for OTB prototypes Voodoo air intake and Tab Performance BAM zombie baffles? Thanks. View answer

Asked 3 ´years ago

Question 12

For the $149.99 jet kit for the 1979 GS1000 does that give me a Jet Kit for all 4 carbs or do i have to buy 4 Jet kits (1 for each carb)? View answer

Asked 5 ´years ago

Question 13

Hi there, would i need a new shift rod if i were to get this module with my 2016 R3? View answer

Asked 4 ´years ago

Question 14

can i just buy the breather hose for a 1985 vmax . the bike is running great but the hose is looking terrible, i just need the hose that comes from the engine fill plug up to the carbs, can you help, i do not want to spend $400.00 just for a hose. G.Muir. View answer

Asked 3 ´years ago

Question 15

If I change out this air box cover do I need a new tune? If so do you have a tune for it? View answer

Asked 3 ´years ago

Question 16

I am inquiring about the ecu flash for the challenger. My bike has stage 2 cams, do you support this. I don't see an option on the drop down menu. Whats the speed limiter at after the flash. View answer

Asked 3 ´years ago

Question 17

I have the power vision 3 for my 18 scout. I am installing bassani 2-1 pipes and a s&s intake. My question is: do I need to delete the o2 sensors? If I leave them in does it take away from the tune? View answer

Asked 4 ´years ago

Question 18

Does power vision programmer read DTC codes and be able to erase them as well after repairs? View answer

Asked 4 ´years ago

Question 19

What will the policy be if my ECU needs to be re-flashed due to dealer service re-flashing? View answer

Asked 3 ´years ago

Question 20

Hi,I'm planning to get a Triumph Street Triple RS 2021 model, will this be compatible with the model? View answer

Asked 4 ´years ago

Question 21

I'm wondering if this would work with the euro/Aus LAMS/ restricted motorbikes? I have a 2019 CBR650r ABS LAMS (learner approved motorcycle scheme - Australian learner restrictions) motorbike. View answer

Asked 3 ´years ago

Question 22

Is this plug and play or do I need to upgrade my clutch springs? View answer

Asked 3 ´years ago

Question 23

Can you provide a tune for XSR900 with M4 exhaust, stock air filter? View answer

Asked 4 ´years ago

Question 24

Are there any other parts needed to preform the install besides the PCIII like different linkage? View answer

Asked 3 ´years ago

Question 25

IS there a dyno chart and/or Video that shows the difference in the Tune to stock, does this also resolve some of the issues folks have reported with responsiveness and random stalling at stop? View answer

Asked 3 ´years ago

Question 26

What are the advantages/disadvantages of having a higher rev limit? View answer

Asked 3 ´years ago

Question 27

Why is this product not available for purchase in the USA? Is it illegal in all of the USA or just California? View answer

Asked 5 ´years ago

Question 28

Is there an Powercommander available for Kawasaki Ninja ZX-10R 2021? View answer

Asked 4 ´years ago

Question 29

do i juste need this for tune or need something more on the bike for change air/fuel ration ? and whit that can i activate the Quickshifter ? on yamaha MT-07 View answer

Asked 3 ´years ago

Question 30

I'm considering the power commander V with rev ext. For my 2010 Honda Stateline and I see there are available maps for download. Are the maps an additional cost as it appears on your site? View answer

Asked 5 ´years ago

Question 31

Hi, this this fit Mt 125 2021? View answer

Asked 4 ´years ago

Question 32

Are the Oxygen Sensors 18mm threads? View answer

Asked 3 ´years ago

Question 33

Hello there, I have a 2020 GSXR-750 and I already have the PCV. I need to get the quickshifter but wasn't sure which rod to get along with it. Any help is appreciated. View answer

Asked 3 ´years ago

Question 34

Could you guys tell me which parts (part numbers) I need to install the QS in my bike, it's a Kawasaki Z900 2020, I already have the PCV, but I need to know all parts that I need to install the QS please, thanks! View answer

Asked 4 ´years ago

Question 35

hello, does it include the cables? View answer

Asked 4 ´years ago

Question 36

If using the K&N PL-1720 air filter, do I select High-Flow intake or stock? View answer

Asked 3 ´years ago

Question 37

what tune do I get? I have a 2020 Indian scout bobber with Trask intake and freedom performance 2-1 combat exhaust. View answer

Asked 4 ´years ago

Question 38

How will this affect the factory warranty on the bike? View answer

Asked 3 ´years ago

Question 39

Where can I find instructions for the newest model, because I can find instructions that contain what the blue,white, and prob wires are for. I lost mine and need to know what wire is what View answer

Asked 4 ´years ago

Question 40

Is there any PC5, suitable for FJR1300A 2016 & above? View answer

Asked 4 ´years ago

Question 41

Hi,Im interesting in your module, i got only akrapovic slipon, rest of bike are standard. Can i use your map or i have to take my bike for dyno, and tuning.Do you have dyno graph crf1100 with your map? View answer

Asked 4 ´years ago

Question 42

hello, can this unit be used on the 2021 Honda CB650R? can you send a photo of the socket so I don't buy it wrong View answer

Asked 3 ´years ago

Question 43

Will part # 16-068 work with the 2021 Honda CBR1000RR? I'm assuming that it wouldn't but I wanted to double check anyways. If no did you possibly know if something was in the works for the newer Honda CBR1000RRs. Thank you for your time and help. View answer

Asked 4 ´years ago

Question 44

hi, has this been confirmed to work with a model year 2022 xp 1000 premium? I'm sure nothing has changed between 21 and 22 but just wanted to confirm. thank you View answer

Asked 4 ´years ago

Question 45

Kz 1000 misfire to no spark View answer

Asked 3 ´years ago

Question 46

I plan on boosting my Vulcan S. Do you offer any models with more than 1 inputs? View answer

Asked 4 ´years ago

Question 47

Is this kit for one single carb or does it cover both carbs? The VT1100C3 has two carbs. This kit says it will fit the bike. Do I need to order one kit or two? View answer

Asked 4 ´years ago

Question 48

what all does the ds6-1 include ? does it come with the cup that replaces the points lobe ? View answer

Asked 4 ´years ago

Question 49

Do I need to purchase from Dynojet directly to gain access to the tune files or can I use my favorite retailer? View answer

Asked 4 ´years ago

Question 50

Can the Power Commander V for Can-Am Spyder RT be used with your single-channel AutoTune module? Is the Can-Am UEGO used or must the AutoTune UEGO also be installed? Thanks. View answer

Asked 4 ´years ago

Browse by Topic