Question 1

with PV4 can you turn up the rev and speed limiters? View answer

Asked 2 ´years ago

Question 2

Does this remove the top speed limiter on a 2014 CB1100? Or does it simply allow for control of the fuel/air mix? View answer

Asked 2 ´years ago

Question 3

do i need extension cable if the ports are closer to the front of the pipes? View answer

Asked 2 ´years ago | Target Tune Full Kit for Harley-Davidson Touring / Trike Models

Question 4

Does this require a throttle by wire? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 5

Does flashing erase how many miles it had on the atv? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 6

Is there any way I can purchase the cable by its self? View answer

Asked 2 ´years ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 7

I'm wondering if this cable will work on my 2023 Nightster Special. View answer

Asked 2 ´years ago

Question 8

In description it states can be upgraded with Autotune feature, if thats the case am I able to use this unit and the Autotune unit together? If so how would I set that up? View answer

Asked 2 ´years ago

Question 9

Does this work with a MAC View answer

Asked 2 ´years ago

Question 10

I have a 02 gsxr750 I have a Annitori Quickshifter on it will the 2 work together and also it says that u have one tune available for it i hope there is more than that i don't have stock air or exhaust. thank you hope we can do business View answer

Asked 2 ´years ago

Question 11

Hi. Can I use it with Power Vision 4? View answer

Asked 2 ´years ago

Question 12

The rinehart mufflers you advertise on your video for the challenger, are they the classic's or the dbx 40's or the dbx 45's? View answer

Asked 2 ´years ago

Question 13

Silly question but do you have to remove the carbs to install this? View answer

Asked 2 ´years ago

Question 14

Has the issue with the 15% difference in speed been addressed with the 2006 Sportster Models? If not, what is the fix? View answer

Asked 2 ´years ago

Question 15

This includes 2 coils and 4 plug wires? View answer

Asked 2 ´years ago

Question 16

What is the size of the ball on the ball mount? Trying to find an alternative to mounting with screws. View answer

Asked 2 ´years ago

Question 17

I'm wondering what temperature the machine can hold if the Quixifter runs right next to the engine, and I'd like to get a spec sheet of Quixifter or a more detailed manual. View answer

Asked 2 ´years ago

Question 18

I have a 2005 Harley-Davidson Road King and having some issues with the Power Commander 6. I installed the slip on and intake map and connected it to the bike. I ride out and after about 15 minutes of riding the bike stalls out. Does the bike need the Autotune kit? That's the only thing I believe it can be. Thank you for the help. View answer

Asked 2 ´years ago

Question 19

The image says 'US model only'. I have a New Zealand new DR65SE. Will this kit fit my bike?Many thanks. View answer

Asked 2 ´years ago

Question 20

Will this fit the 2022 Kawasaki KLX 300SM model? I'm having a hard time finding a commander for this bike View answer

Asked 2 ´years ago

Question 21

How are the contacts that plug into the Dyan Coil attached/applied to the wire?Thanks,Wes View answer

Asked 2 ´years ago

Question 22

Want to set this up as a dual plug set up but I have a kick only Shovel ...will this set up work? View answer

Asked 2 ´years ago

Question 23

What are the system requirements for the software. My lap top seems to download the PCFC control without issues and I can load maps into the software but the software won't connect to the PCFC. Status light is red and lap top recognizes its connected to the device, just not the software. View answer

Asked 2 ´years ago

Question 24

I have a 2003 kawi 636. Would this module be compatible with my bike. Or will any other modules work? View answer

Asked 2 ´years ago

Question 25

I have a pc6 for kawasaki zx10r 2022Will this AT-200 will work with it? View answer

Asked 2 ´years ago

Question 26

Is the Power Vision 4 compatible with a 2022 Indian Scout Bobber ABS? View answer

Asked 2 ´years ago

Question 27

Looking for a little hotter coil without going to crazy, add ons ,etc. Have a 1982 GS1100 e Suzuki, only modification are a Vance & Hines headers and carbs jetted. Thanks Nolan View answer

Asked 2 ´years ago

Question 28

Do you have tunes available for a 2014 CB500F with an upgraded Air Filter (likely the Dynojet one) and a shorty exhaust (likely Coffman). It isn't clear to me in this list of tunes what model years are supported. View answer

Asked 2 ´years ago

Question 29

I have a 1999 dyna. Engine is built to a 98ci, heads are decked and port and polished, has a fueling 594 cam, as well as running larger valves in the heads. Obviously I wouldn't be doing the 36A curve, what would be the recommended start for this build? View answer

Asked 2 ´years ago

Question 30

I have a 2006 Harley Davidson Dyna Super Glide FXD/I with an early model ECU from the factory. Recently I purchased a PV3 that said it would connect to my bike however it would not read the ECU so I returned it. Dynojet tech dept told me after I purchased it that there were a couple of early model ECU's that it would not connect too. Will the PC-1B connect to all ECU's that came with my bike when it was new. View answer

Asked 2 ´years ago | Harley-Davidson Power Vision for Delphi J1850 ECU Black

Question 31

My motor builder tuned my 2010 SG with a power vision tune that changes my ECM information. All I got when I picked up the bike was a memory stick with the tune information on it. I would like tune my 2009 RG CVO. It's my understanding I will only need to buy another tune license and a cable, or just the tune license? Thanks... Tom View answer

Asked 2 ´years ago | Power Vision for Harley-Davidson Flash License

Question 32

Does it work with 2021 Euro5 ?? View answer

Asked 2 ´years ago

Question 33

Ive got a polaris and a canam I would like to tune. Is there an adapter to be able to do that or do I just need to get a liscense for it? View answer

Asked 2 ´years ago

Question 34

what is the length of this wire ? , how many feet or inches ? Thank You Mark View answer

Asked 2 ´years ago

Question 35

DSK6-2 Dyna S single fire ....is this 5 ohm or 3 ohm? View answer

Asked 2 ´years ago

Question 36

What size jets come with this kit View answer

Asked 2 ´years ago

Question 37

Are NGK Laser Iridium 90526 spark plugs ok for a 2018 Canam X3 XMR Turbo R with Dynojet programmer? View answer

Asked 2 ´years ago

Question 38

i have a 2021 Triumph Street Triple 765/Low with full exhaust, DNA filter, AIS plate kit & a power commander V, i have not ridden the bike yet as it needs tuned. Can i get this instead of paying to have it tuned by dealer? View answer

Asked 2 ´years ago

Question 39

Hello, i'm looking to purchase a Vitpilen 701 but i'm in A2 flange limit for 2 years, however i want the overal smoothness and reliability to be betterCan i use a power commander for a bike with A2 restricitons ?And because we can have 2 individual maps on the PC6, can i have one A2 spec and one tuned as full power for example ? ( For circuit racing )Thank u ! View answer

Asked 2 ´years ago

Question 40

So quick question does the lcm come pre loaded with just a basic setting? Like a 2200rpm setting? Or would the user have to set that and mess with injection timing and etc. View answer

Asked 2 ´years ago

Question 41

Do you make aDyna S ignition to fit 2008 Suzuki gs500 twin. Thanks Andrew View answer

Asked 2 ´years ago

Question 42

I have a 2023 Indian Super Chief with the TS111 will the power vision 3 work on it? Is the power vision 4 going to be compatible with the Indians going forward? View answer

Asked 2 ´years ago

Question 43

Where is the Stage 2 kit? View answer

Asked 2 ´years ago

Question 44

What is the secondary side resistance of these coils. View answer

Asked 2 ´years ago

Question 45

I changed the exhaust on my 2001 fxsts and have a dyna tek tc88 and now the bike is running super hot and lean. What are the settings I should have going? View answer

Asked 2 ´years ago

Question 46

Is this the correct PCFC for a 2024 KLX300? View answer

Asked 2 ´years ago

Question 47

Will this unit will work on my 2023 TriGlide FLHTCUTG? I do not see 2023 TriGlide listed under fitment, just the 2021-2022's View answer

Asked 2 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 48

Does PV3 supports 2023 Indian Scout Bobber yet? It says on the page that it supports 2023 Scout Bobber but still want to confirm prior to purchase it. Thank you. View answer

Asked 2 ´years ago

Question 49

Why does your brand support 2022 Honda CBR300R ABS? View answer

Asked 2 ´years ago

Question 50

Hey i have a pc6 with me for suzuki Hayabusa 2018I want to install quick shifterSo what all should I getWhich rod should I purchase along with sensorDo I need quick shifter expansion module View answer

Asked 2 ´years ago

Browse by Topic