Question 1

What stage is this kit? Qr121. My engine has been rebuilt and I have fmf full system exhaust and k&n air filter with k&n power lid. What stage do you guys recommend? View answer

Asked 1 ´year ago

Question 2

Will the dual channel kit also work for single cylinder bikes? I have both twin and single cylinder bikes that I would like to use this on. Thanks View answer

Asked 1 ´year ago

Question 3

Thank you for your time in advance. I will be able to stay on throttle and not upshift with my foot while accelerating and I will be able to down shift with my foot while I use the clutch in the normal manner while downshifting, correct? View answer

Asked 1 ´year ago | QuickShifter Kit for 2001-2016 Harley-Davidson EV1 Injectors

Question 4

Is this tune for the KRX 1000? View answer

Asked 1 ´year ago

Question 5

can I use the same tune we used to tune a 2022 can am renegade 1000 xmr to also tune my 2018 can am outlander 570? if I buy the license View answer

Asked 1 ´year ago

Question 6

Is it possible to read the stock ecu and store the file somewhere safe, and restore to the original tune after flashing one dynojets tunes if needed? View answer

Asked 1 ´year ago

Question 7

Does this kit include everything needed to re-jet both carbs that are on the bike? Or will 2 kits need to be purchased? View answer

Asked 1 ´year ago

Question 8

can I eliminate the cam sensor with this unit ? View answer

Asked 1 ´year ago

Question 9

Does this kit fit on a 2015 rzr xp4 1000 View answer

Asked 1 ´year ago

Question 10

I have installed a cone filter and a set of short exhaust pipes with no baffles what size jet will I need your standard 3 won't do it View answer

Asked 1 ´year ago

Question 11

Hallo.I have a question about delivery.What is the delivery time to Switzerland? View answer

Asked 1 ´year ago

Question 12

I have Suzuki GSXR 1000 K6 with PC6 will the 4-130 be compatible as most are sold for PCV View answer

Asked 1 ´year ago

Question 13

What?s the difference between this and the Stage 2 kit? View answer

Asked 1 ´year ago

Question 14

Great looking product! I have a 15 SGS with a 131 and a Tmax for my turbo application. Can I use this shifter with my Tmax? View answer

Asked 1 ´year ago

Question 15

Will the SFM work with Power Commander 6. View answer

Asked 1 ´year ago

Question 16

Are you planning to make power commander for CB650R 2023 with ECU 38770-MKY-DN1 EU. View answer

Asked 1 ´year ago

Question 17

How is this device different from a power commander? Does this connect to the stock ECU or do I need to also purchase a power commander as well? View answer

Asked 1 ´year ago

Question 18

This is a bit more technical ..... I have the pv3 kit i bought for my 2011 XL883L which is a 4 pin connector cable Po# PV3 15 01. I recently bought a 2020 XL1200ns. which uses the 6 pin connector cable Po# PV3 15 02... the head units look the same between the 2 kits... couldn't i just buy the 6 pin communication cable and an extra tune license and reuse the head unit i already have for my 2020? or are the head units different software? View answer

Asked 1 ´year ago

Question 19

I have a 2000 gsxr 750 with a power commander 3 usb among other upgrades and looking for a quick shifter. Can i get a list of all parts needed to install the quick shifter and have it fully functional on my bike? I would like to order all needed in one checkout. Thanks View answer

Asked 1 ´year ago

Question 20

Have auto tune and target tune for some reason Check engine light comes on when bike is Italy. And not under load but as soon as I go. Wonder load or at continuous high-speed check engine. Light comes on for the 02 sensors. As soon as I decelerate or come to a stop check in engine goes off.Do a replace sensors or target tune. ? View answer

Asked 1 ´year ago

Question 21

On the Yamaha TW Kit, do you offer a few more mainjets than what's included in the kit? I need a size or two larger than a 130.Thanks, Paul View answer

Asked 1 ´year ago

Question 22

I have a 2012 VROD VRSCDX, will this system work with it stand alone? If not will I have to also purchase the Power Commander 5 (or equivalent since the V was discontinued)? View answer

Asked 1 ´year ago

Question 23

I bought a 2001 Honda Shadow ACE and came with a modified exhaust without muffler. Would this kit be suitable for aftermarket pipes? View answer

Asked 1 ´year ago

Question 24

I have several Harley?s (7) actually. Is there a product I can purchase that can be used with a PC to tune several different bikes. View answer

Asked 1 ´year ago | Target Tune for Harley-Davidson J1850 ECU 52/10'' 2P

Question 25

I?m looking for ignition module with quick shifter and power commander that is in advance View answer

Asked 1 ´year ago

Question 26

1,Can compatible 2021 super chief? 2, The incompatibility with Scout models,Because different cable connectors?Thank you! View answer

Asked 1 ´year ago

Question 27

If I order this part number from my local dealer, does it come with this basemap pre installed? If so is the map any different from stock? View answer

Asked 1 ´year ago

Question 28

Can i run this without a tsm/tssm? Also this is for a racing application. Can this be shipped to California. View answer

Asked 1 ´year ago

Question 29

Will this work on my 1976 HD FX kick-start only model? View answer

Asked 1 ´year ago

Question 30

Can this device can remove the factory co2 probes to eliminate closed loop? View answer

Asked 1 ´year ago

Question 31

I have a 2010 cbr 1000rr with a PC5. What shift rod do I need for the quickshifter? View answer

Asked 1 ´year ago

Question 32

What ist the Power Commander VI shipping time?Delivery to switzerland. View answer

Asked 1 ´year ago

Question 33

Hey, I have an 06 cbr 1000rr with a full two brothers exhaust. It has a dead spot at low end because of not being tuned for the exhaust. Would the 6 be able to throw enough fuel at it to fix that? And what keeps the 02 from just pulling that fuel back out? View answer

Asked 1 ´year ago

Question 34

Does this operate similar to the PV3 in that it removes the speed and RPM limiters? Is it with a simple tune, or is it more complicated? View answer

Asked 1 ´year ago

Question 35

Do you have any maps for simple exhaust change and low speed surging? Or user uploaded maps for the Yamaha xvs1300? View answer

Asked 1 ´year ago

Question 36

Will the singular license that comes with the purchase allow for installing and switching tunes on the same vehicle? View answer

Asked 1 ´year ago

Question 37

I bought a PCV for my 2002 Honda VTX 1800 S motorcycle. I would like to know if the POWER COMMANDER POD-300 DISPLAY is compatible. View answer

Asked 1 ´year ago

Question 38

Can this eliminate the tssm,02 dyna is what I'm fixing. View answer

Asked 1 ´year ago

Question 39

I have a 2005 gsxr600. I am buying a pc6 for it and want to install quickshifter as well. Is this the one I would buy and what else would I need for any kind of sensors and shift rods? View answer

Asked 1 ´year ago

Question 40

Is the AT200 comparable with the 2014 Royal Enfield Continental GT 535 Cafe or is there a specific AT200 for the RE Continental GT 535?My GT 535 does have the Power Commander V installed. View answer

Asked 1 ´year ago

Question 41

if i put this on full power and try to launch it will it give me a power wheelie and i have never had a bike higher then a 300 but i wanted to move up to this since i had he 300 for years. i do not know how to control this amount of power if you could tell me if it would give me a power wheelie and how to stop it from doing that but still giving me the fastest launch possible it would be much appreciated View answer

Asked 1 ´year ago

Question 42

Hi. This is in reference to SKU# DS6-1 to be installed on 1998 FLSTS HD.1. There is not a download on the website for the instructions. Can you email them to me or I do I get access to the installation instructions.2. It appears by the photo on the website that it has two wires, is this correct?3. Where do the wires connect to? Or if you can provide the wire instructions this question is not required.4. What do I do with the three wires going from my ignition module to my currect cam position sensor?5. Do I need to purchase any other parts to ensure this new cam position sensors works with my bike? Note, I have all stock parts on my bike.Thank you,Hank View answer

Asked 1 ´year ago

Question 43

Will this work on the 2023 570 xmr ? View answer

Asked 1 ´year ago

Question 44

My 2023 Road Glide 3 is not listed for use on the POWER VISION 4 or the POWER VISION. (The one with the LED screen) Will this be updated shortly? Thanks View answer

Asked 1 ´year ago

Question 45

Will the dual channel kit work with a 2014 Honda Valkyrie with PCV? I'd like to run one for each cylinder bank like stock, but the documentation suggests that the PCV will see these as 2 separate single cylinders as opposed to the 2 banks of 3 cylinders the bike has. Please clarify. View answer

Asked 1 ´year ago

Question 46

I put the TC88 on my 2000 Road King FLHR; my question is about the cam sensor. Does this module require it or can I bypass the cam sensor by simply removing the wire or unplug from connector? I've read mixed things on forums, etc. Thank you!! View answer

Asked 1 ´year ago

Question 47

I have the pv4 for the renegade 1000 and I'm going to need an additional license for another renegade but I'm seeing a license for the pv4 or will the pv3 license work for it View answer

Asked 1 ´year ago

Question 48

Good day, do you have a power commander for kawasaki z1000r 2023 model? View answer

Asked 1 ´year ago

Question 49

Has the issue with the 15% difference in speed been addressed with the 2006 Sportster Models? If not, what is the fix? View answer

Asked 1 ´year ago

Question 50

This includes 2 coils and 4 plug wires? View answer

Asked 1 ´year ago

Browse by Topic