Question 1

Can you lower idle speed with this? View answer

Asked 4 ´years ago

Question 2

Hello I have a 2002 Honda cbr954rr.. does this module need a PC in order to function? And what parts would I need to run this module on the bike. Thanks in advance View answer

Asked 4 ´years ago

Question 3

Is this stainless, or molt steel? View answer

Asked 4 ´years ago

Question 4

will this coil work with the D2KI-1P 2000I Electronic Ignition Module View answer

Asked 4 ´years ago

Question 5

Will this work on a 2022 HD Pan America? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 6

Does this replace the OEM or does it require a second bung? View answer

Asked 4 ´years ago

Question 7

Does the powervision completely flash the ECU (replace existing map)? Is there any way the confirm via the vin number or serial number if the powervision will work with my CBR650R 2020? View answer

Asked 4 ´years ago

Question 8

With the purchase of One license can I flash files on multiple ecu's? If not, is there a license available for tuners flashing multiple units?Thanks! View answer

Asked 4 ´years ago

Question 9

Will the PCV help/stop the fuel cut off causing abrupt deceleration ? View answer

Asked 4 ´years ago

Question 10

Good day, do you have a power commander for kawasaki z1000r 2023 model? View answer

Asked 3 ´years ago

Question 11

Does this quick shifter go up and down? View answer

Asked 2 ´years ago

Question 12

I have an old chrome PV part # 1020-1494I have a 2021 HD touring model that has a PV licensed tune. Will this cable work with my old display unit on this bike? View answer

Asked 3 ´years ago

Question 13

I didn't see a 2021 Ryker ACE listed in the fitment list. Is it compatable to clear code with a 2021 Ryker ACE Not a Rally? If so where and how do I purchase. I have a 37873 zip in TennesseeThanks for you time. View answer

Asked 3 ´years ago

Question 14

I have a 1999 dyna. Engine is built to a 98ci, heads are decked and port and polished, has a fueling 594 cam, as well as running larger valves in the heads. Obviously I wouldn't be doing the 36A curve, what would be the recommended start for this build? View answer

Asked 3 ´years ago

Question 15

i have a 2005 zx10r and was thinking about getting a quick shifter, what other parts or rods would i need to do this? View answer

Asked 2 ´years ago

Question 16

Power Vision 4 for INDIAN. WHAT is the return/refund policy?

Asked 3 ´months ago | Power Vision 4 for Indian

Question 17

Hi,I recently purchased a used 2013 Triumph Thunderbird Storm (1700 w/abs). I see a PCV is listed for this bike for 2010-2014 (SKU 21-001) but is discontinued and out of stock. But I also see SKU PC6-21019 (in stock) fits my bike for model years 2014-2015. So if a unavailable one fits my bike and is for 2010-2014 and available one also fits a 2014 I would think it may fit for my 2013? Please let me know if this PC6 would actually fit my 2013?Thanks, Scott View answer

Asked 2 ´years ago

Question 18

An meiner Kesstech klappensteuerung ist ein 6 poliger deutschstecker… die Harley hat einen roten s6 poligen Steck…

Asked 3 ´months ago | CBL,Crossover,Euro 5 to HD Deutsch

Question 19

2026 Rebel 1100 DCT Power Commander

Asked 3 ´months ago | Power Commander 6 for Honda Rebel 1100

Question 20

I running a PC6 on an 05 FXDWGI and looking to add an autotune kit Will this work? The description only refers to PC5.POWER COMMANDER AUTOTUNE FOR HARLEY-DAVIDSON WITH 4-PIN CONNECTORS (WITH O2 BUNGS)SKU#AT-100BThanks, Mark View answer

Asked 2 ´years ago

Question 21

Hello! Is the power Vision designed to send the tune to the motorcycle and then disconnect, or does it have to stay connected? I want something that I can hook up, send the tune to the ECU and disconnect. Thanks! View answer

Asked 3 ´years ago | Power Vision for Harley-Davidson Flash License

Question 22

Hi guys Ive fitted this to my MT-10sp, is there a different one for the sp model, because im getting suspension faults and a spanner light on the dash. View answer

Asked 3 ´years ago

Question 23

Can this be used to bleed an ABS module on a 2023 Harley Davidson Softail (FXFBS)?

Asked 3 ´months ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 24

Dear Ladies and Gentlemen,I bought the PCV for my Yamaha XV 950 with the Vance and Hines Twin Slash Staggered exhaust and the VO2 air filter also from Vance and Hines. After loading and installing the New Map the machine starts, but the speed is only in the range between 700 and 800 rpm and the machine goes off again if I don't turn on the gas tap. The engine control lamp also lights up. As far as I know, I have connected all the cables as indicated in the instructions and now I do not know any more. Therefore, I ask for your help to solve my above mentioned problem. Thank you and best regardsJannis H�fel View answer

Asked 2 ´years ago

Question 25

What is the difference between PV3 2510 and 2510C View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 26

Hello,Models go up to 2021, but would this be adequate for a 2023?Thanks View answer

Asked 3 ´years ago

Question 27

I have a 2011 CBR250R that I enjoy working on. I'd like to add a Power commander V but it is discontinued. Any chance there is one there for purchase? View answer

Asked 2 ´years ago

Question 28

This kit should be good for a banshee since it has 2 carburators?? View answer

Asked 2 ´years ago

Question 29

I am looking at putting this on my Honda trx700xx. I already have a power commander 6 installed. Seeing as there is no o2 sensor on my exhaust, what procedure will I have to do to get this working? Thank you. View answer

Asked 2 ´years ago

Question 30

If I put a power commander 6 on a Harley can I put it on a different Harley or is it married to the first bike? View answer

Asked 3 ´years ago

Question 31

Still waiting for an answer...

Asked 1 ´month ago | Jet Kit for 1980-1982 Kawasaki KZ550 LTD

Question 32

I have a 2022 Indian Springfield will this work on my bike? View answer

Asked 3 ´years ago

Question 33

What curve for replacing a SE ICM?

Asked 1 ´month ago | DSPT IGN for 2004-2006 Harley-Davidson Sportster 883

Question 34

PV3 for Indian FTR1200 new licence for different bike

Asked 1 ´month ago | Power Vision for Indian Flash License

Question 35

Hello I am looking for a performance alternative to the stock single fire TI ignition on my 82 Honda Gl500 and noticed this says single fire and twin the stock Honda coils are 12volt 3ohm coils so would this be a working alternative View answer

Asked 2 ´years ago

Question 36

Hi. Do you have a power commander that fits my 2019 Lynx Xtrim 850 E-TECH? is it maby the same as used on the ski-doo 850 E-tech ?? Is there any big different on the PCV and the new PC6? View answer

Asked 2 ´years ago

Question 37

Will this work with the factory ignition setup on my 1990 Yamaha FJ1200 View answer

Asked 2 ´years ago

Question 38

How long a duration of data can be logged in the POD-300 and can that data be exported to Excel, Matlab, etc? View answer

Asked 2 ´years ago

Question 39

I have this unit on my 2022 KLX300R. Can you tell me if it's controlling only fuel, or fuel and ignition ? View answer

Asked 2 ´years ago

Question 40

Is there a way to test this unit? It looks like the module is not switching when trying to set the static timing as the test light is always lit. View answer

Asked 1 ´year ago

Question 41

Hellocan i command this for France, no more sellers for this parts in my country....how i can buy it?Thanks View answer

Asked 2 ´years ago

Question 42

I?m looking to purchase a complete kit to add onto my cbr 600 f4i do I need to just buy the dual sensor and shift rod b ? And everything will work then or what ? Thanks again ! View answer

Asked 2 ´years ago

Question 43

My bike was dyno?d with a new cam on stock O2s last summer. Would widebands and target tune give me any better performance and would this be safe to do? View answer

Asked 2 ´years ago

Question 44

Does this unit fit to 2006 KTM 990 ADV as well? View answer

Asked 1 ´year ago

Question 45

Will this fit a 2024 breakout? View answer

Asked 1 ´year ago

Question 46

will pc6 support methanol fuel in a 2006 vrscr View answer

Asked 2 ´years ago

Question 47

Do i need to purshase the powercommander separately or is this all i need? View answer

Asked 1 ´year ago

Question 48

Will it works with my stock HD dual fire ignition coil? View answer

Asked 3 ´years ago

Question 49

Hi, its the ignition module for Power Commander V like ignition module for Power Commander 3? Thank View answer

Asked 2 ´years ago | Power Commander V Ignition Module for 2006-2016 Yamaha YZF600 R6

Question 50

Does it come preloaded with tunes? View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Browse by Topic