Question 1

This states it works for 2018 bikes and newer, but after reading a few things it seems the first year it supports is a 2020. I have a 2019 OUTLANDER 850, will the PV3 work with this bike? View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 2

Won't this work with the later/2020 models as well? If we can tune it ourselves the provided maps won't matter. I'm just concerned about it hooking up and communicating correctly. View answer

Asked 3 ´years ago

Question 3

Is this the complete unit. Or do you have to buy the Power Commander 5. And also the O2 sensors separate? View answer

Asked 3 ´years ago

Question 4

Will this raise my rev limiter to 6,500 or higher? View answer

Asked 3 ´years ago

Question 5

Hi I'm considering purchase of the power vision but before I do I must ask. If just want to tune it for exhaust now..can I load a tune it in later for a cam? ..and if so do u guys offer the cam tune? Or is that somthing ill have to go have done custom? View answer

Asked 3 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 6

What size jets come in this kit View answer

Asked 3 ´years ago

Question 7

hi with a new power vision 3 for my 2021 maverick sport xxc model pv3-25-04 coming this week ,,,,could hi use the same unit with a new licence purchase to programme my 2016 can am spyder f3-t limited or if is not compatible i will need to buy a other power vision 3 for can am spyder f3 View answer

Asked 3 ´years ago

Question 8

what are the main differences in the Power Vision 3 an the Power Commander V View answer

Asked 3 ´years ago

Question 9

Do I have to download my own tune to this or does it come pre tuned, I have a 2022 honda shadow phantom with short shots Vance and Hines on it. View answer

Asked 3 ´years ago

Question 10

Will this work with any after market exhaust? Like a dominator slip on exhaust on a 2011 can am renegade 800r xxc View answer

Asked 3 ´years ago

Question 11

Can you take off governor with this? View answer

Asked 3 ´years ago

Question 12

My sons recon has a slip on hmf pipe with a k&n filter I was told by hmf employer to go with the 105 jet and the bike backfires quite a bit so I went with the 110 still same issue I checked the spark plug it is white So I know it is burning lean so I am up to suggestions as what to do at this point does it need a bigger jet and if so do yall have bigger than a 110 jet View answer

Asked 3 ´years ago

Question 13

Does this work with the Power Vision tuner for 2022 M8? View answer

Asked 3 ´years ago

Question 14

Does this product specifically adjust the AFR accordingly? Or does it just read it? View answer

Asked 3 ´years ago

Question 15

Is there any jetting chart available for the 08 honda foreman trx 500fm. depending on outside temp. Im looking for maximum performance without blowing motor lol. View answer

Asked 3 ´years ago

Question 16

Does this work for the 2021 Canam Lonestar HD10? I see it says 2018-2020 but I selected 2021. View answer

Asked 3 ´years ago

Question 17

Will this fit my 2022 gsxr 1000r abs View answer

Asked 3 ´years ago

Question 18

Does the PC6 also work on the 2014 Victory Cross Country? View answer

Asked 3 ´years ago

Question 19

I have the Powervision CX Version 4.0 on my 2017 Can Am X3 XRS.Here are aftermarket goodies installed.2018 fuel pump/EVO Hi Flow Air Intake Kit/Cat delete pipe/Gibson Slip on exhaust/ID1050X Whalen Injectors/Whalen Spark Plugs gapped at .16/Large innercooler+10" fan/KMS Dune clutch kit.Can you build a program to maximize what is installed on my Can Am??? View answer

Asked 3 ´years ago

Question 20

Will this work with any 2021-2022 ECU or only a select few? View answer

Asked 3 ´years ago

Question 21

What is the difference between the PC FC, the PC V Ignition and the PC 6? Do they all do the same thing or what? Unsure which one I should consider if I decide to upgrade my intake and exhaust. View answer

Asked 3 ´years ago

Question 22

Can I use this on my Yamaha R1 2012 with my PCV & AutoTune setup? How accurate will the AFR readings be? View answer

Asked 3 ´years ago

Question 23

is it waterproof View answer

Asked 3 ´years ago

Question 24

05 GSXR 1000 with PC3. What else do i need for a quick shifter? View answer

Asked 3 ´years ago

Question 25

Will it work on RZR PRO XP 2022 ? It is not listed in the Fitments . View answer

Asked 3 ´years ago

Question 26

Does the Power Commander 6 for the 2019-2021 KTM 690R Enduro accommodate changes to the ignition maps? All the website says is "where applicable". View answer

Asked 3 ´years ago

Question 27

Hola RUEGO me asesoren, tengo una PV-2B, que necesito montar en una XR1200 del 2010 . con este cable se puede utilizar la PV-2b en esa moto View answer

Asked 3 ´years ago

Question 28

i have a PV tune done on my bike, do i need the actual PV unit for this to link up with? or does this just plug right into the bike as is? View answer

Asked 3 ´years ago | Target Tune Full Kit for Harley-Davidson Touring / Trike Models

Question 29

Hi, Ive purchased the PV SKU PV-2B for my street Glide 2018 FLHX. after plugging in to the ECU and switch on my bike, my PV showing error reading vehicle info: 'Couldn't find ECU family'...How can i get this resolved? pls advise. View answer

Asked 3 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 30

Will this be available for Indian models? View answer

Asked 3 ´years ago

Question 31

Do I need PV Tuning Licence if I have PV installed on my S&S 128ci 550cam Tri-Glide and want to dyno tune it? View answer

Asked 3 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 32

Please share how it would work with a Rekluse EXP auto clutch and Thundermax tuner? Also can it be turned off/on on the fly (assuming there are reason to do so on occasion)? View answer

Asked 3 ´years ago

Question 33

Does this work with the pc6? View answer

Asked 3 ´years ago

Question 34

will it fit a 2016 Polaris slingshot? View answer

Asked 3 ´years ago

Question 35

In features it is stated that AT-200 is compatible with any Power Commander V. Does it work together with Power Commander 6 also? View answer

Asked 3 ´years ago

Question 36

HelloDo this Iteam fits a Aprilia SX 50 -07 2strokeOr you maybe only do iteams for motorcycles.?Best regards Peter View answer

Asked 3 ´years ago

Question 37

Is this a stand alone unit for any application or is it for use with your programers only? Thanks View answer

Asked 3 ´years ago

Question 38

Do you guys offer replacement wideband sensors? View answer

Asked 3 ´years ago

Question 39

dont seem to be much info on tunning , how would i get the correct tune for an 03 flhrci with a 1550 kit without a dyno ? thanks/ View answer

Asked 3 ´years ago

Question 40

I have a stock 2021 canam maverick 1000r xrc I just order the dyno jet vision 3 for it I just want to make sure it will work on my all stock machine without upgrading anything else View answer

Asked 3 ´years ago

Question 41

Will this fit my Yamaha yp 400 mejetic View answer

Asked 3 ´years ago

Question 42

I am looking into this tuner for my 2022 CB300R ABS. I am looking for just a bit more torque for the highway speeds (75mph). How much does the stock intake/exhaust tune gain? View answer

Asked 3 ´years ago | Power Commander 6 for Honda CB300R

Question 43

What range is the crack pressure hood for? Will this suffice for the bigger turbo mods or is there a tighter spring for higher resistance on the higher boost? View answer

Asked 3 ´years ago

Question 44

Will the POWER COMMANDER 6 FOR 2010-2020 HONDA FURY (VT1300) actually work for a 2011 Honda Fury the description shows Honda fury, but when you look it up by application it says that this product does not fit my application? Thank you for your time. View answer

Asked 3 ´years ago

Question 45

does it have to stay on the bike all the time View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 46

What is the expected HP increase? View answer

Asked 3 ´years ago

Question 47

Does it work on 2021 FLHXS european version (euro5)? View answer

Asked 3 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 48

I have a 1993 Honda shadow 1100 and it has the dual carburetors will this kit jet both of the carburetors or just a single one. View answer

Asked 3 ´years ago

Question 49

if my rzr is tuned by a different tuner can i read the tune with my power vision 3 tuner View answer

Asked 3 ´years ago

Question 50

Will you be upgrading the system for Indian models, specifically the Challenger DH? View answer

Asked 3 ´years ago

Browse by Topic