Question 1

I bought a 1995 honda shadow ace with drag pipes it starves for fuel above half throttle needs bigger jet ? View answer

Asked 3 ´years ago

Question 2

Buen d�a quer�a consultar si el kit viene con sus respectivos cableados de conexi�n o si se compra aparte. Muchas graciasGood day, I wanted to ask if the kit comes with its respective connection cables or if it is purchased separately. Thank you very much View answer

Asked 3 ´years ago

Question 3

Hi Team, 1. I would like to "POWER VISION 3" for my 2021 HONDA CRF300 RALLY. Is this can also use on Rally?2. I have own another motorcycle: 2017 Yamaha TMAX 530 SX ABS.If I have one for my CRF300 Rally.Can this available for TMAX by cable-change ? View answer

Asked 3 ´years ago

Question 4

Is this compatible with the 2022 TRX520FA7 model as well? View answer

Asked 3 ´years ago

Question 5

Is there already a tune set into it when I order it or do I have to download iy View answer

Asked 3 ´years ago

Question 6

When will auto tune be ready for 2021 softails? View answer

Asked 3 ´years ago

Question 7

I installed one of your systems on a Harley a few years ago with great success. I'm now building a Banshee, and I've been told over and over again that the high price of the OEM CDI, coil, stator, etc is worth every penny in terms of reliability. Are you guys of the opinion that this product will be just as reliable as the OEM Yamaha parts or as reliable as your Harley ignitions? Also, one of the upgrades for the Harley was that with the original system, one spark plug fired when it didn't need to, and your product eliminated that for what was said to be easier starts amongst other things. Will your CDI and coil eliminate both plugs firing at the same time, all the time, on my 2002 Banshee?Thanks,Allan904-495-8803 View answer

Asked 3 ´years ago

Question 8

Being that the 2020 and the 2021 model KLX230R had zero changes, will the Dynojet PCV work with the 2021?Also, i am sure you are aware of the high idle issues with the KLX230R. Will the PCV fix this issue? Is the idle adjustable from the PCV software overriding the automatic idle?I plan to install a Pro Circuit T-6 full exhaust system (if i can ever find one) and will certainly need the PCV for fuel adjustments.I purchased the PCV for the KLX300 in the past and you have not let me down. Thank you. View answer

Asked 3 ´years ago

Question 9

Is there a ?stage 2/3? set up available with this kit? I see the needle has adjustments for the e-clip and two sets of even larger main jets then the instructions talk about. Motorcycle is a 2002 Triumph America w/ UNI air filter, drilled and screened air box, snorkel delete, Triumph High performance exhaust system from dealer w/ baffles removed by previous original owner, and AI delete and cap. Only run non ethanol recreational gas. Thanks View answer

Asked 3 ´years ago

Question 10

Is this everything I'll need to install or is there any other parts I would have to buy View answer

Asked 3 ´years ago

Question 11

Will the stock map/traction control switch still work with the pc5? View answer

Asked 3 ´years ago

Question 12

Hello,Is this compatible with Honda CB650R 2022 EU model?Thanks View answer

Asked 3 ´years ago

Question 13

How come your needles are shorter than stock needles brute force 750 View answer

Asked 3 ´years ago

Question 14

Hola ..para mi yamaha r6 2008 con power commander 5, que debo comprar para instalar todo el sistema quickshifter?Gracias View answer

Asked 3 ´years ago

Question 15

Our Ecu number is 38770-mky -h52, but its horsepower is limited. Can I solve it with this? View answer

Asked 3 ´years ago

Question 16

Tengo un KRX 1000, quiero saber que ben�ficos tengo si compro el dynojet, incrementa la velocidad o nada mas las revoluciones?La velocidad maxima de KRX 1000 es 68 millas por hora, en cuanto va a aumentar ? Y va a gastar mas gasolina?Muchas gracias de antemano View answer

Asked 3 ´years ago

Question 17

why does it say it doesn't fit 21 gsxr 750 when the product is labeled to be for that bike. but when you use vehicle search it brings you to the gsxr600 and says it fits, kind of confused? View answer

Asked 3 ´years ago

Question 18

Is this a 4 or 6 pin connector?Will it work with the 2021 Road King M8 View answer

Asked 3 ´years ago

Question 19

Hello,I've installed the PC5 on my Yamaha R6RJ11 and also fitted the QEM15. Now I installed the push/pull sensor but I can't seem to connect the shifter with the QEM. I have 2 pairs of wires exiting the push-pull sensor (blue/green and Red/yellow). The QEM only has the blue/green output. Do I just ignore the yellow/red? There is not that much info besides "splice them". Is there any example?Thanks! View answer

Asked 3 ´years ago

Question 20

Hello ! Is the pv3 working with the Indian FTR S ?19 with the ?21 march ride command update ( MAS4A6.AP2104A.swu). Regards, BG View answer

Asked 3 ´years ago

Question 21

Will this work on the 05 600rr. it says 07 to 12 but it says it will fit my bike View answer

Asked 3 ´years ago

Question 22

So I know other people have asked the question of the 2022 Can Am Outlander 570 XMR. It has the same diagnostic port as the rest of the can am?s. Is there any way I can be the first to get my model tested and tuned. Also my other question is there a way when I hook it to my system if it?s compatible I can tune it myself through the software, will this work? View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 23

Hola, tengo el sensor y el m�dulo de expansi�n para una Suzuki GSXR 600. 2016. Me los instalaron, pero no puedo hacer cambios r�pidos para arriba y para abajo. Solo puedo hacer para arriba, que necesito para poder hacer cambios para abajo tambi�n? View answer

Asked 3 ´years ago

Question 24

Why over 8 tunes for the stock exhaust on the yxz1000r . What is the difference between all these maps . Also is this device compatible with the 2022 yxz1000r ss xtr thanks . View answer

Asked 3 ´years ago

Question 25

The listing says 2019 but I?m assuming it works on a 2021 xsr? View answer

Asked 3 ´years ago

Question 26

will this work with a 2021 570 xmr View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 27

MICHELLE.BARNETT4@GMAIL.COM View answer

Asked 3 ´years ago

Question 28

Does this new PV4 also do the auto-tune? View answer

Asked 3 ´years ago

Question 29

Does the powercommander work on A2 restricted bikes? I have a 2021 Z650 48hp/35kw View answer

Asked 3 ´years ago

Question 30

So I'm looking to put an NX kit on my Talon. It is a wet kit, however IF additional tuning after other mods, I want to be able to monitor my a/f. Will your wideband gauge (SKU#15-7018) work with this unit? View answer

Asked 3 ´years ago

Question 31

So I have to buy an auto tuner along with the power commander? View answer

Asked 3 ´years ago

Question 32

I have just purchased the Power Vision for my 2017 Road Glide.If I want to add a bike I understand that I have to purchase a License to do so.If I add my 2007 Fatboy do I need another cable to connect to the interface.? View answer

Asked 3 ´years ago | Power Vision for Harley-Davidson Tuning License

Question 33

Is this plug and play or do I need to upgrade my clutch springs? View answer

Asked 3 ´years ago

Question 34

Are there any other parts needed to preform the install besides the PCIII like different linkage? View answer

Asked 3 ´years ago

Question 35

IS there a dyno chart and/or Video that shows the difference in the Tune to stock, does this also resolve some of the issues folks have reported with responsiveness and random stalling at stop? View answer

Asked 3 ´years ago

Question 36

What are the advantages/disadvantages of having a higher rev limit? View answer

Asked 3 ´years ago

Question 37

Are the Oxygen Sensors 18mm threads? View answer

Asked 3 ´years ago

Question 38

do i juste need this for tune or need something more on the bike for change air/fuel ration ? and whit that can i activate the Quickshifter ? on yamaha MT-07 View answer

Asked 3 ´years ago

Question 39

you have answered that it will fit international model , but international model has 4 o2 sensors , is there any way to eliminate those ? View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 40

I am inquiring about the ecu flash for the challenger. My bike has stage 2 cams, do you support this. I don't see an option on the drop down menu. Whats the speed limiter at after the flash. View answer

Asked 3 ´years ago

Question 41

can i just buy the breather hose for a 1985 vmax . the bike is running great but the hose is looking terrible, i just need the hose that comes from the engine fill plug up to the carbs, can you help, i do not want to spend $400.00 just for a hose. G.Muir. View answer

Asked 3 ´years ago

Question 42

New to DynoJet. I have the new PV-3B and am using it on my 2021 Harley Road Glide Limited w 114ci engine, D&D 2-1 exhaust and Arlen Ness AC. I'd like to be able to use the auto tune function. If so what exactly will I need to have the auto tune capability? Thanks View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 43

Can you provide me with the dwell time for this coil? View answer

Asked 3 ´years ago

Question 44

Having trouble getting the correct the shift rod length. Have a 2013' Kawi zx6r, with Vortex rearsets. The current rod measures at about 190mm. Any ideas as to which rod to go with? Thanks! View answer

Asked 3 ´years ago

Question 45

Do we need a power commander V to use this effectively? View answer

Asked 3 ´years ago

Question 46

Will this work with a Road Glide Limited? I don?t see that in the list. View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 47

does this work for Harley international models ? View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 48

Is this compatible with my PV-1 part number 1020-1493 ? If not is the auto tune still available for this Power Vision View answer

Asked 3 ´years ago

Question 49

Does it fit without a power commander or absolutely need one to install the quick shiftter? View answer

Asked 3 ´years ago

Question 50

Hi, I am wondering if the Stage 2 Kit for 2014-2018 Honda CB500/CBR500 needs a Power Commander V for Honda CBR500/CB500(Fuel & Ignition) to function or it function by itself?Thanks and best. View answer

Asked 3 ´years ago

Browse by Topic