Question 1

Hello, I have a 2004 Yamaha R6 with a Power Commander 3, will this work with this power commander model or will a newer one be required? I was also wondering which shift linkage is needed since the stock linkage goes through the frame.Thanks View answer

Asked 4 ´years ago

Question 2

I have a 2008 kvf brute force carburator.This module is good for mine or i need the dfs2-13 ? View answer

Asked 3 ´years ago

Question 3

I have a 2 ki installed on a 1991 HD 1340 cc motor that is about 10 years old since a major rebuild. It has performed flawlessly for the last 10 years, and on starting motor yesterday all was good and i let it warm up for about 10 minutes, then shut it down. 20 Minutes later i tried to start bike and no go. I believe the ignition module make have failed. On troubleshooting i got to the point of no spark, and then pulled covers to access ignition module and coils. I have 12vdc on the white wire at the coil, however no green led light on power on, and no green led pulsing on cranking without plugs. Am i correct in assuming the module has probably failed? Any way to further diagnose the module? View answer

Asked 4 ´years ago

Question 4

do i need to purchase the power command v also with this kit or does it include it? View answer

Asked 4 ´years ago

Question 5

Hello, I have a 2022 Kawasaki klx 300r and I am looking to get your power commander V tune for it. I have been doing research with people installing different pipes like a pro circuit t-6 slip on, a delkovic slip on yourand also the recommended exhaust the FMF Q4 exhaust that you list on your website. I was wondering if your product will work with the pro circuit pipe or is their any underlying conditions with the tuner that it needs the FMF Q4? Thanks and have a great day. View answer

Asked 4 ´years ago

Question 6

The above text states: All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). Is timing change applicable to the -09 KTM Adventure? View answer

Asked 3 ´years ago

Question 7

What else do I need to put this on my 2016 polaris XPT 925cc with stock fuel pump, stock injectors, and black O2 sensor has the larger fan upgrade for radiator and silicone charge tubes, bov, aftermarket assassins slip on exhaust, and clutch? I want to be able to run 91 octane without mixing race fuel View answer

Asked 4 ´years ago

Question 8

will this tuner, tune stage 2?,2005 flstci, if not what tuners do? View answer

Asked 3 ´years ago

Question 9

Hello! I?m assembling a drag bike using a magneto as ignition source. Is it still possible to use one of these. Reason being I?m looking to equip a shift light and module and do not have any coils View answer

Asked 3 ´years ago

Question 10

Just to be sure, is the price for a single coil or do I need to buy one per cylinder?? Also, I understand they may be sold in California for race-only motorcycles if the buyer provides an attestation that the non-CARB parts will be used for off-road vehicles only. It is my understanding that other manufacturers do this routinely. Any reply will be greatly appreciated. Cheers! View answer

Asked 4 ´years ago

Question 11

I?m looking for a jet kit for a Mikuni Tm40 with accel pump that is on a Suzuki DR650. View answer

Asked 4 ´years ago

Question 12

WHERE CAN I FIND SOME MAPS FOR THIS THERE IS NONE ON YOUR WEBSITE THERE IS SOME FOR THE 300R BUT I DONT THINK THEY WILL WORK View answer

Asked 4 ´years ago

Question 13

I do not see my year and model for the PV4. I have a 2010 Ultra Classic. It was tuned years ago with a Power Vision from the previous owner and now I am looking to upgrade it. Also, any dates on gauges and autotune? View answer

Asked 4 ´years ago

Question 14

Can the AFR be adjusted at all rpm?s, or are there sections of the power curve (sections of the map) that cannot be adjusted on the 2022 KLR Adventure ABS? Also, can the PC6 advance timing on this bike? View answer

Asked 3 ´years ago

Question 15

This kit doesn't mention stage 3 in the instructions. Is stage 3 a seperate kit? View answer

Asked 3 ´years ago

Question 16

Will this fit a 2020 Kawasaki Ninja 400 View answer

Asked 4 ´years ago

Question 17

Hello, it is now end of May 2022, i see below someone asked 7 months ago if you have a download set up for a Akrapovic full exhaust. is there one now available? View answer

Asked 4 ´years ago

Question 18

Just installed the target tube kit with the widebands. Working great but the connectors on the O2 sensors don?t appear to be sealed. Will water from riding in the rain cause problems with the sensors? How do you recommend keeping water out of them. View answer

Asked 4 ´years ago

Question 19

how does it communicate with the ECU? If it just gathers data from the 02 sensor then how is it able to manipulate a tune.? View answer

Asked 3 ´years ago

Question 20

if this is added to a 2014 RZR 1000 with a PV3 tuner does this adjust a/f trim instantly as in live. or does it have to be reviewed and a/f programs adjusted for a updated download? View answer

Asked 3 ´years ago

Question 21

When kept plugged in can it be used as speedo and tach as well? What display values are available View answer

Asked 4 ´years ago

Question 22

I have a 22 maverick trail 1000 dps when I upload my pv file it tells me there are no tunes available for my machine but yet this programmer says it works for my machine. View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Maverick Trail/Sport

Question 23

Can this be used for a 2018 Maverick Trail 1000 DPS if I buy another license and get the tune for that machine? View answer

Asked 4 ´years ago | Power Vision 3 for Can-Am Outlander

Question 24

This does not work on 21 plus models, correct? If not, do you know when a similar product will be available for the newer models? View answer

Asked 4 ´years ago

Question 25

Buongiorno volevo sapere se il sensore per husqvarna smr 610 e fatto come in foto o si adatta plug and play al mio modello? View answer

Asked 4 ´years ago

Question 26

Do you need the pv3 to use this. Or can it be used just by it self to self tune View answer

Asked 4 ´years ago

Question 27

Is it compatible with the 2022 monkey125 Japan model?Culd you ship to Japan? View answer

Asked 4 ´years ago

Question 28

can I buy a license and use my buddy's pv3 to tune and flash my bike? View answer

Asked 4 ´years ago

Question 29

Can this be used with a 2021 CVO TriGlide with a stage 4 kit added making it a 131 cubic in. instead of an 117 cubic in.? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 30

Witam wysy?ka do Polski 2 szt naklejek jest realna View answer

Asked 3 ´years ago

Question 31

Looking at the Power Vision 3 for my ?18?MT-09. I find the throttle pretty twitchy ? is there a map that can mitigate this? View answer

Asked 4 ´years ago

Question 32

Do you offer a tuner for 2022 scout bobber twenty? View answer

Asked 4 ´years ago

Question 33

Can you give me an approx. increase in hp and torque for a 2022 Indian Pursuit 108 with stage 1 intake, K&N drop in filter and stage 2 cams? Exhaust is stock, looking for approx numbers not percentage. Thank you View answer

Asked 4 ´years ago

Question 34

Hi, what is the difference between this and the fuel tuner? View answer

Asked 3 ´years ago

Question 35

I bought one of these D6-4 coils. I need to know, which coil outputs, connect to which spark plugs? The wiring diagram does not show this. And they are not marked on coil. Which outputs, are for the front cylinder? What outputs are for rear cylinder? Thanks Kerr View answer

Asked 4 ´years ago

Question 36

Will this read and clear codes on 2015 rzr trail 900 View answer

Asked 4 ´years ago

Question 37

SirHow or where can I buy the Power Vision 3 or 4 for my HD XL1200X forty-eight 2016 in Taiwan? View answer

Asked 4 ´years ago | Power Vision 3 for 2011-2022 Harley-Davidson CAN ECU

Question 38

I just bought a quick shifter dual contact sensor for my 2020 mt09. Do i also need to buy a rod or will the stock one work? View answer

Asked 4 ´years ago

Question 39

i have a 2008 kawasaki zx6r with the Power Commander 6 i wanted to add a QuickShifter What all do i need to get? View answer

Asked 4 ´years ago

Question 40

What kind of performance increase, if any, can I expect from this kit? HP/ torque increase? Fuel economy? View answer

Asked 3 ´years ago

Question 41

Hi, does this come with the wire that connects to the auto tune module? I ordered a dual band but it only came with 1 cable but 2 o2 sensors. View answer

Asked 4 ´years ago

Question 42

Hi there! I just bought a 2006 Yamaha YFZ450 with carburetors and a CDI. I wanted to know if you could provide me the 4 ignition settings and let me know which one is the one that makes the curve go as low as possible (like stock).Thank you in advance :) View answer

Asked 3 ´years ago

Question 43

Hey guys is the PC6 switchable between a 'street' tune and a 'race/track' tune like the 5. Also how many tunes are available for the 6.ThanksJohno View answer

Asked 4 ´years ago

Question 44

after install speedo dont work View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 45

How do I know if I have the 6 pin connector or not? I have the 2022 1k5 deluxe. Also, will this help the machine run correctly with an aftermarket big gun exhaust? thank you, Adam View answer

Asked 3 ´years ago

Question 46

If I revert back to stock before taking the bike into the Harley Service Department, will they know I had a tune? Does it leave a foot print?? View answer

Asked 4 ´years ago | Power Commander 6 for Harley-Davidson Touring

Question 47

Hello, will it work if i remove the tssm system?regards View answer

Asked 4 ´years ago

Question 48

I have a 97 883 engine. Will I need a mechanical advancer with this IM? Thanks View answer

Asked 4 ´years ago

Question 49

Can you view sensor data on the Power Vision 4? View answer

Asked 4 ´years ago | Power Vision 4 for 2021-2024 Harley Davidson

Question 50

Why doesn't this work for the 2021 can am 570 xmr and and only works on the 2022 570 xmr View answer

Asked 4 ´years ago | Power Vision 3 for Can-Am Outlander

Browse by Topic