Question 1

Will this work on a 2022 H2 SX SE? View answer

Asked 2 ´years ago

Question 2

I have a PV3 with 2 tunes on it that are licensed to my 2022 CanAm Maverick X3. Can I purchase additional licenses and use my PV3 to tune my friends machines as well (with one of the 2 tunes I have already) on their X3's (there's 9 of us in our group and all machines are 2019-2023) View answer

Asked 2 ´years ago

Question 3

After purchasing a new license, is it required to purchase any other additional cabling? Or is it as simple as loading the additional license onto the tuner and plugging it in? View answer

Asked 2 ´years ago | Power Vision for Harley-Davidson Flash License

Question 4

Using invision on my 23 challenger. Will this unit be vin locked to my bike only or can I use on any other bike. View answer

Asked 2 ´years ago | InVision Monitor Device for Indian Motorcycle MG1

Question 5

How can ?autotune? be used without O2 sensors installed? View answer

Asked 2 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 6

Does the power vision 3 read and clear codes View answer

Asked 2 ´years ago

Question 7

Can PV4 be used with H-D auto tune kit AT-110 ? View answer

Asked 2 ´years ago

Question 8

What size is the kit ? View answer

Asked 2 ´years ago

Question 9

Does this work with the can am module for snow tracks? View answer

Asked 2 ´years ago

Question 10

Dear Ladies and Gentlemen,I bought the PCV for my Yamaha XV 950 with the Vance and Hines Twin Slash Staggered exhaust and the VO2 air filter also from Vance and Hines. After loading and installing the New Map the machine starts, but the speed is only in the range between 700 and 800 rpm and the machine goes off again if I don't turn on the gas tap. The engine control lamp also lights up. As far as I know, I have connected all the cables as indicated in the instructions and now I do not know any more. Therefore, I ask for your help to solve my above mentioned problem. Thank you and best regardsJannis H�fel View answer

Asked 2 ´years ago

Question 11

Could you please tell me the difference between there two tuners, they both fit my machine.SKU#PV3-2516CSKU#PV3-2516Thank you?. View answer

Asked 2 ´years ago

Question 12

Even though it says the PV3 fits a 2020 renegade 1000R XXC, Is there a better option View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 13

I sold my current bike and purchased a new one. Can I transfer the license from the old bike to the new one? I will only have the new bike and don't need multiple licenses. View answer

Asked 2 ´years ago | Power Vision for Harley-Davidson Flash License

Question 14

Hi,I recently purchased a used 2013 Triumph Thunderbird Storm (1700 w/abs). I see a PCV is listed for this bike for 2010-2014 (SKU 21-001) but is discontinued and out of stock. But I also see SKU PC6-21019 (in stock) fits my bike for model years 2014-2015. So if a unavailable one fits my bike and is for 2010-2014 and available one also fits a 2014 I would think it may fit for my 2013? Please let me know if this PC6 would actually fit my 2013?Thanks, Scott View answer

Asked 2 ´years ago

Question 15

Will this work with a 2012 Cvo street glide View answer

Asked 2 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 16

Can the four output coil (DC6-4) be used with points ignition for a dual plug conversion? View answer

Asked 2 ´years ago

Question 17

i have a 2005 zx10r and was thinking about getting a quick shifter, what other parts or rods would i need to do this? View answer

Asked 2 ´years ago

Question 18

It's a pretty good basic tuner if just doing Air and pipes. using a data logger and then making adjustments is long and tedious work, The Tune turned out really well. Not everyone is capable, just like not everyone has access to a Tuner with a Dyno or one that can be trusted! So where is the auto-tune feature? View answer

Asked 2 ´years ago

Question 19

Bought pv3 for Honda cb650rr 2023 but it does not recognize the ecu.please help View answer

Asked 2 ´years ago

Question 20

Do I need to purchase this to use the auto tune feature on a Power Vision 3 for a 2023 Honda CBR650R, or can the Power Vision 3 auto tune with stock o2 sensors? Thank you. View answer

Asked 2 ´years ago

Question 21

Does the Autotune basic available with harley MT22 ECU (model 2021.. with a 02 sensor attached into exhaust) ? View answer

Asked 2 ´years ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 22

Does this fuel controller have different maps stored in it? Like can I switch to a different map without having to connect my laptop to it? View answer

Asked 2 ´years ago

Question 23

I have purchased one of these from EuroBike in Australia, but I need coils. They were unsure how to respond to this questions so I am coming to the source. What are the best coils to use? If they are your coils, do you have an Australian distributor. View answer

Asked 2 ´years ago

Question 24

Will this work for a 2024 Honda Shadow aero with cobra intake and cobra exhaust? View answer

Asked 2 ´years ago

Question 25

I have a 2022 Suzuki Hayabusa and I bought the PCM V. Unfortunately, the motorcycle doesn't respond to tuning in any way. Since there's no map in your database either, I think you've come to the same conclusion. The 2022 Hayabusa is resistant to PCM V. Do you have any solution to this situation? I bought an expensive box that is completely useless. Will you refund my money? Or are you working on a solution to make PCM work? Thank you. View answer

Asked 2 ´years ago

Question 26

Am I able to plug the power vision? 3 into a 2023 can am Outlander 1000 R? And take these speed limiter off. And if so, how do I do it with the licenses? Because it was recently Paired to a Harley Davidson, Or a Honda one of those 2. View answer

Asked 2 ´years ago

Question 27

Will this work on my 09 crossfire 800 R sled? Just bought the PC6. View answer

Asked 2 ´years ago

Question 28

Will this PC help with throttle application? My throttle on my 2019 SV650 is very abrupt on/off when at low RPM in town. Its very hard to be smooth with the throttle. I would like to have the throttle respond like a cable operated one, not a fly by wire as it is.ThanksBilly View answer

Asked 2 ´years ago

Question 29

Does this module allow the bike to run with or without the factory security module in place? Building a chopper and i dont need all the extra xxxx . View answer

Asked 2 ´years ago

Question 30

Will this work with a 05 hayabusa with a power commander 5? Dual exhaust View answer

Asked 2 ´years ago

Question 31

My dyno guy swears that the Power Commander V is better than the PC6. Is this true and what is the difference? Can I buy a Power Commander V from you? View answer

Asked 2 ´years ago

Question 32

I am looking at putting this on my Honda trx700xx. I already have a power commander 6 installed. Seeing as there is no o2 sensor on my exhaust, what procedure will I have to do to get this working? Thank you. View answer

Asked 2 ´years ago

Question 33

with PV4 can you turn up the rev and speed limiters? View answer

Asked 2 ´years ago

Question 34

do i need extension cable if the ports are closer to the front of the pipes? View answer

Asked 2 ´years ago | Target Tune Full Kit for Harley-Davidson Touring / Trike Models

Question 35

Does flashing erase how many miles it had on the atv? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 36

regarding the PCFC FC20900 for the burgman 650 2015 . When i read the pdf install document on your site, it seems that there is only one map available for stock exhaust and stock air filter.(map selector on position 1) Is it possible ? I'm planning to buy this product because i will install a gpr complete line with cat and performance air filter... thank you. View answer

Asked 2 ´years ago

Question 37

Does this work with a MAC View answer

Asked 2 ´years ago

Question 38

I have a 02 gsxr750 I have a Annitori Quickshifter on it will the 2 work together and also it says that u have one tune available for it i hope there is more than that i don't have stock air or exhaust. thank you hope we can do business View answer

Asked 2 ´years ago

Question 39

Fitment lists the 2023 FXLRS but not the older models. Does it fit the 2018-2022 models as well? View answer

Asked 2 ´years ago

Question 40

The rinehart mufflers you advertise on your video for the challenger, are they the classic's or the dbx 40's or the dbx 45's? View answer

Asked 2 ´years ago

Question 41

Silly question but do you have to remove the carbs to install this? View answer

Asked 2 ´years ago

Question 42

What is the size of the ball on the ball mount? Trying to find an alternative to mounting with screws. View answer

Asked 2 ´years ago

Question 43

I'm wondering what temperature the machine can hold if the Quixifter runs right next to the engine, and I'd like to get a spec sheet of Quixifter or a more detailed manual. View answer

Asked 2 ´years ago

Question 44

I have a 2005 Harley-Davidson Road King and having some issues with the Power Commander 6. I installed the slip on and intake map and connected it to the bike. I ride out and after about 15 minutes of riding the bike stalls out. Does the bike need the Autotune kit? That's the only thing I believe it can be. Thank you for the help. View answer

Asked 2 ´years ago

Question 45

The image says 'US model only'. I have a New Zealand new DR65SE. Will this kit fit my bike?Many thanks. View answer

Asked 2 ´years ago

Question 46

Will this fit the 2022 Kawasaki KLX 300SM model? I'm having a hard time finding a commander for this bike View answer

Asked 2 ´years ago

Question 47

How are the contacts that plug into the Dyan Coil attached/applied to the wire?Thanks,Wes View answer

Asked 2 ´years ago

Question 48

Want to set this up as a dual plug set up but I have a kick only Shovel ...will this set up work? View answer

Asked 2 ´years ago

Question 49

What are the system requirements for the software. My lap top seems to download the PCFC control without issues and I can load maps into the software but the software won't connect to the PCFC. Status light is red and lap top recognizes its connected to the device, just not the software. View answer

Asked 2 ´years ago

Question 50

I have a pc6 for kawasaki zx10r 2022Will this AT-200 will work with it? View answer

Asked 2 ´years ago

Browse by Topic