Question 1

What is the length and number of cables?Thanks View answer

Asked 2 ´years ago

Question 2

I have a PV-1 and I now have a 2019 Triglide. Will my pv1 work on my Triglide with a 4 pin cable and a 6 pin adapter. View answer

Asked 2 ´years ago

Question 3

The previous owner of my bike had bought a power vision license to get it tuned. Do I, as the new owner, need to purchase a license to tune it as well? View answer

Asked 2 ´years ago | Power Vision for Harley-Davidson Flash License

Question 4

Hello! Will this kit be able to bypass the Bank Angle Sensor on a 2003 hugger 883? I saw someone reference the 2000i as a remedy for a failing BAS sensor and that it could be run with the 2000i and the BAS could simply be left unplugged, is the same possible with the Dyna S system and coil? Thanks and have a great day! View answer

Asked 2 ´years ago

Question 5

Hi, its the ignition module for Power Commander V like ignition module for Power Commander 3? Thank View answer

Asked 2 ´years ago | Power Commander V Ignition Module for 2006-2016 Yamaha YZF600 R6

Question 6

Hello, I have a ninja 400 2021 and I was wondering if this will work with the bike? View answer

Asked 2 ´years ago

Question 7

will pc6 support methanol fuel in a 2006 vrscr View answer

Asked 2 ´years ago

Question 8

Hello, is this sensor compatible with Power commander 3 USB? View answer

Asked 2 ´years ago

Question 9

Hello,I have a question about the DRL Magneto 300 CDI Kit. Is it possible to run the rev limiter without a battery? I have an old race bike with a Kr�ber magneto ignition without battery or anything similar. Is there a wiring manual or instruction manual available so that I could check if it would fit?Best regards,Robin View answer

Asked 2 ´years ago

Question 10

I lost my instructions just wondering where I can find them View answer

Asked 2 ´years ago

Question 11

On Thruxton R, is ignition timing adjustable? View answer

Asked 2 ´years ago

Question 12

will this replace my cdi box under triangle cover behind seat on 1989 harley 883 . i just install under nose cone and wire direct to appropiate connections ? View answer

Asked 2 ´years ago

Question 13

I just installed the Dynatek TC88 ignition on my 2003 Dyna Superglide. The bike has a Kerker 2 into 1 exhaust, modified CV carb, Ness Big Sucker intake, and S&S 509c cams. What would be the recommended ignition curve to start with? Thanks View answer

Asked 2 ´years ago

Question 14

What is the orifice size of the DJ190 View answer

Asked 2 ´years ago

Question 15

Works with Indian Sport Chief 2023? View answer

Asked 2 ´years ago | InVision Monitor Device for Indian Motorcycle MG1

Question 16

2023 Can Am Outlander max xt 1000rpower vision 3 or 4? Both say compatible? View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 17

can this liscence unlock a tune that is allready on the pv3 for canam ryker View answer

Asked 2 ´years ago

Question 18

My bike was dyno?d with a new cam on stock O2s last summer. Would widebands and target tune give me any better performance and would this be safe to do? View answer

Asked 2 ´years ago

Question 19

I am doing a 2007 XL1200C EFI to Carb Swap, will this ignition work? View answer

Asked 2 ´years ago

Question 20

I?m looking to purchase a complete kit to add onto my cbr 600 f4i do I need to just buy the dual sensor and shift rod b ? And everything will work then or what ? Thanks again ! View answer

Asked 2 ´years ago

Question 21

Hellocan i command this for France, no more sellers for this parts in my country....how i can buy it?Thanks View answer

Asked 2 ´years ago

Question 22

My original CDI has 3 cables attached and this box only has 2 ports will it work on my 2006 grizzly 660 View answer

Asked 2 ´years ago

Question 23

How how exactly does the wiring for the injectors work? If I'm using this product on a 4 cylinder engine will I have to solder a different hardness to make it compatible? View answer

Asked 2 ´years ago

Question 24

Do you have any solution that works with the EU ECU of the CRF300L? View answer

Asked 2 ´years ago

Question 25

2020 Polaris Pro XP bone stock (for now): based on some what might be bad advice I installed a high flow AEM fuel pump. Q; can a stock vehicle live with this or will it waste fuel and prematurely wear injectors? Need to add better cage before power adders so may be stock for a while. Thanks View answer

Asked 3 ´years ago

Question 26

Will this work on a 2023 850 xmr outlander ? Don?t know if the 2023 an 2022 are the same ecm View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 27

Hello, I have a 2022 can am outlander 570 xmr with the tune upgrade and I have been wanting to get an exhaust do you have any exhaust tunes that are compatible with the tune upgrade? Allowing me to have both the tune upgrade and an exhaust tune. Thank you! View answer

Asked 3 ´years ago

Question 28

Will this fit a 2007 Kawasaki zx14 and will it fit a 2009 Kawasaki zx10 View answer

Asked 3 ´years ago

Question 29

Can a PCV Map file be used with the PC6 unit? View answer

Asked 3 ´years ago

Question 30

Can I run this on a S&S motor ? View answer

Asked 3 ´years ago

Question 31

Any plans to release one for bikes equipped with software 27? I?ve been waiting for this to release, was stoked until realizing my bike was a 27. View answer

Asked 3 ´years ago

Question 32

Will the Power vision 3 come already loaded with the Tune(s) for my 2018 CB500X? View answer

Asked 3 ´years ago

Question 33

2021 cbr650r absI can only find the power vision.I was hoping to install a power comander 5 or 6 and auto tune like I did on my last bike. Do you plan on making one for this model? View answer

Asked 3 ´years ago

Question 34

Will this work with a 2022 ultra limited View answer

Asked 3 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 35

Does this actually fit the 17 Can am Maverick X3 or not, Fitment notes state it does as well as the products title but when you enter any Maverick X3 at all the compatibility system states it does not and refuses to let you add it to your cart. View answer

Asked 3 ´years ago

Question 36

2019 ranger xp1000, anyone running power vision with a dura clutch? did you need to change anything? View answer

Asked 3 ´years ago

Question 37

i just bought a rjwc slip on exhaust for my 2014 can am renegade 500 , i was wondering what would be the best tuner to buy from the options you guys have and the specific map i would use for a rjwc exhaust. View answer

Asked 3 ´years ago

Question 38

this ad says it?s for bike with points my bike has no points so will this work on my bike or is the ad wrong View answer

Asked 3 ´years ago

Question 39

I'm interested in this item. Actually I've a 2007 Yamaha FZ1 with a PCV and autotuner paired. Next step for me is quick shifter, looking for pressure push and pull type V2.0 but it not fit in my bike? I don't not why?? because you have in your fitments table the Yamaha Fz6 and Fz8 I hope you can help meThanks View answer

Asked 3 ´years ago

Question 40

I'm really interested in the POWER VISION 3 FOR 2017-2021 POLARIS RANGER 500/570. I have a 2015 POLARIS Ranger 570 efi crew with the 8 pin diagnostic connector with the 2015-2017 Ranger 570 eps Chassis Wire Harness OEM part number 2412701 . OK IM saying the wire harness and sensors and ECU, fuel injector, Engine parts all have same oem part numbers as the 2017 Ranger 570 EPS in your Fitment list. WILL the POWER VISION 3 work for me ? thanks View answer

Asked 3 ´years ago

Question 41

If I have two Sportsters (Forty Eight and Iron 883) can I buy a second license and use the same hardware to tune each bike?How much would a second license cost? View answer

Asked 3 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 42

I have a 2018 can-am x3 900 H.O. I was wondering if this would increase the horsepower? if so How much? View answer

Asked 3 ´years ago

Question 43

Will this work for my 2006 CBR600RR? The listing's title says 2008-2012, however in the description it says: " This product FITS your Honda CBR600RR 2006". Just wanted to confirm fitment. Thanks! View answer

Asked 3 ´years ago

Question 44

I have a 2017 rzr xp 4 1000 highlifter.I do trail riding and rock crawling mainly (random sand trips).I will like to fit larger tires 35" -37" do you recommend the stage 2 clutch kit for my car?Thank you View answer

Asked 3 ´years ago

Question 45

Hello I was wondering why this tuner does not work for my 2021 can am 570 xmr. View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 46

Does this work with PV4? And how can you find out if your bike has software level 28. View answer

Asked 3 ´years ago

Question 47

Sorry another question. I have Yamaha roadstar warrior which wire should I use 7mm or 8mm? View answer

Asked 3 ´years ago

Question 48

one wire per order right? View answer

Asked 3 ´years ago

Question 49

2022 models not listed in fitment. Is this compatible with 2022 models? View answer

Asked 3 ´years ago

Question 50

I have a 2006 Electra glide fuel injected will this tuner do what I needed to do View answer

Asked 3 ´years ago

Browse by Topic