Question 1

Hi. I have bought an power commander V for my 1999 Hayabusa, but there is round white connectores on the bike, but square black connector on the PW. What to do? View answer

Asked 1 ´year ago

Question 2

2023 maverick x3 xor turbo rr 64" with 35" tires.will it work for it? View answer

Asked 1 ´year ago

Question 3

Where do i find tunes for aftermarket pipes and snorkels View answer

Asked 1 ´year ago | Power Vision 3 for Can-Am Outlander

Question 4

I just purchased a pv4 for can am outlander 850 xmr and was wondering if I can get a custom tune made View answer

Asked 1 ´year ago | Power Vision 4 for Can-Am X3 Pinout

Question 5

Do I need to buy 2 kits for my Marauder VZ800, or does one kit come with the parts for both carburetors since the motorcycle has 2? View answer

Asked 1 ´year ago

Question 6

Does this product need a PC6 or FC to be used? View answer

Asked 1 ´year ago

Question 7

Your Question: I've got a turbocharged Hayabusa 2002. Is this ignition module compatible with the Power Commander V for the Hayabusa 2002 - 2007 Turbo (20-023-PTI) and with my bike? View answer

Asked 1 ´year ago

Question 8

Does this coil need to be bolted with standoffs and to the frame? I am looking to replace my OEM coil on my 1976 KZ400 as well as moving the location of it, but the place that I found that will be perfect is not a section of frame or connected to the frame. View answer

Asked 1 ´year ago

Question 9

On my bike, I have been struggling with power, it?s stock. A homie messed around with it before I had it to make it shoot flames on the stock carb. I don?t care for flames, I would like my power back. Runs rich. I have to replace the secondary diaphragm cover cause it?s very cracked, the intake boot also falling apart, and the float bowl only had three screws in and was leaking. I?m hoping repairing this will fix my issues, but was wondering, would it be better to install this jet kit on a 42mm mikuni performance carburetor for better power? Or stock carb is better? View answer

Asked 1 ´year ago

Question 10

Does this need upgraded 8mm suppression core spark plug wires? Or the stock 7mm copper core wire? View answer

Asked 1 ´year ago

Question 11

Does this have a tune for 2023 models? Says "Power Vision 3 for Honda CB650 / CBR650 has tunes, see below"NO TUNES AVAILABLE... View answer

Asked 1 ´year ago

Question 12

whats the difference between PV3-29-02 vs PV3-2902C??? View answer

Asked 1 ´year ago

Question 13

Will this work on a '22 Low rider S? View answer

Asked 1 ´year ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 14

Can I use this to remove the 35kw ECU restriction on my mt-07 2023? View answer

Asked 1 ´year ago

Question 15

So I have a 2003 gsxr 1000 and wanna get a quick shifter for it but also want to get a power commander as well what would be the best setup? View answer

Asked 1 ´year ago

Question 16

What size is the kit ? View answer

Asked 1 ´year ago

Question 17

Can PV4 be used with H-D auto tune kit AT-110 ? View answer

Asked 1 ´year ago

Question 18

Does the power vision 3 read and clear codes View answer

Asked 1 ´year ago

Question 19

How can ?autotune? be used without O2 sensors installed? View answer

Asked 1 ´year ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 20

Does the 05 sportster custom have points if so where are they located View answer

Asked 3 ´years ago

Question 21

Is this the same as a ecm thats under the seat on 05 sporty carbed View answer

Asked 3 ´years ago

Question 22

Will this product still fit if I have a S&B particle separator installed on my 2022 Razr Pro XP 4 Ultimate? View answer

Asked 3 ´years ago

Question 23

Helloi can?t add new tune licenses to cart, everything else i can. Do you know reason View answer

Asked 3 ´years ago

Question 24

HI. Does this fit EU version of 2022 honda grom ecu? View answer

Asked 3 ´years ago

Question 25

Hi DynoJet, I'm looking to swap my stock air box on a 2001 Honda Shadow Ace for 2 Pods and I've watched some video online and they are saying the best is 110 Front and 115 Rear and 45 Pilot Jet. What's the size of the Stage 1 ? by the number I've gave you do you have something in stock for my bike that is similar to that ?Best Regards Vincent Cardinal. View answer

Asked 3 ´years ago

Question 26

Would these replace coils on a 1982 Suzuki GS450A? OEM part number is 33410-44X50 View answer

Asked 3 ´years ago

Question 27

I have a 22 renegade 850 with itc throttle Will this work? I was looking at all the tunes and only saw tunes for the 1000 and outlander 850s. I also have a 22 outland 570xt. Could I use the same tuner with another license? View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 28

Im buying this Dyno Jet for my 2021 Rzr Polaris 1000 xp Trails & Rocks and I want to know, is the flash tune already on the device? and all I have to do is plug it into my machine and hit flash tune. View answer

Asked 3 ´years ago

Question 29

I HAVE THE 32-001 ON A 2012 HISUN 800 UTV. WILL THIS DO THE PROGRAMMING FOR ME WHEN ATTACHED TO THE POWER COMMDER V ON THE 2012 HISUN 800CC UTV View answer

Asked 3 ´years ago

Question 30

Does it compatible with Dynojet Quickshifter Expension Module QEM-11? View answer

Asked 3 ´years ago

Question 31

If I already own a stage 1 intake OEM for a 2019 Indian Chieftain Classic would I need to use the intake lid and reinstall the original intake? View answer

Asked 3 ´years ago

Question 32

Will this tuner void my warranty if I use 1 of your tunes? View answer

Asked 3 ´years ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 33

I have a PV3-25-04 for canam will this tune work on it for this outlander? Pretty sure the ecm hook ups are the same View answer

Asked 3 ´years ago

Question 34

Will this work with a 2021 Honda Talon 1000R Live Valve? View answer

Asked 3 ´years ago

Question 35

With the new FTC ruling, buying this no longer voids my Harley-Davidson factory warranty? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 36

Can this ignition module work on the 2021 YXZ1000R SS as well? View answer

Asked 3 ´years ago

Question 37

Would this bring it to the true 650s stock 62 hp or would it take it beyond that? Thanks View answer

Asked 3 ´years ago

Question 38

Is this compatible with the 2023 can am outlander 850xmr View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 39

Do you ship to CA? View answer

Asked 3 ´years ago

Question 40

will this work with power commander 6 since PCV is discontinued and is this all i need for quick shifting View answer

Asked 3 ´years ago

Question 41

Will this fit my 2009 triumph bonneville se ? View answer

Asked 3 ´years ago

Question 42

My tuner only came with 2 tunes and neither of these apply to my motorcycle, I see all of the available tunes on this website. I have tunes in "My garage" but I can't seem to move them into the tuner/make them show up on the app like they are supposed to. View answer

Asked 3 ´years ago

Question 43

Does this POWER VISION 3 HANDLEBAR MOUNT KITSKU 61300105 work with the Dynojet Power Vision PV-3B 2021-2022 Harley Davidson SKU:PV-3B? View answer

Asked 3 ´years ago

Question 44

Since there is not a kit specifically for the Honda CB1000C,would it be better to use the CB900C kit with 126 or 130 main jets or the CB1100F stage 1 kit 120 or 124 because of the needle differences? Or do I just have to trial and error? I ask because the instructions for the CB750C/CB900C seem to be written with only the CB750 in mind as far as the jets, as it mentions a different drill for slide holes,but the jets it suggest are 96 & 100 when the stock jet on the 900 is a 105, so the stock jet on the CB1000C being a 110 has me really wondering which kit to use. View answer

Asked 3 ´years ago

Question 45

Since there is not a kit specifically for the Honda CB1000C,would it be better to use the CB900C kit with 126 or 130 main jets or the CB1100F stage 1 kit 120 or 124 because of the needle differences? Or do I just have to trial and error? I ask because the instructions for the CB750C/CB900C seem to be written with only the CB750 in mind as far as the jets, as it mentions a different drill for slide holes,but the jets it suggest are 96 & 100 when the stock jet on the 900 is a 105, so the stock jet on the CB1000C being a 110 has me really wondering which kit to use. View answer

Asked 3 ´years ago

Question 46

Since there is not a kit specifically for the Honda CB1000C,would it be better to use the CB900C kit with 126 or 130 main jets or the CB1100F stage 1 kit 120 or 124 because of the needle differences? Or do I just have to trial and error? I ask because the instructions for the CB750C/CB900C seem to be written with only the CB750 in mind as far as the jets, as it mentions a different drill for slide holes,but the jets it suggest are 96 & 100 when the stock jet on the 900 is a 105, so the stock jet on the CB1000C being a 110 has me really wondering which kit to use. View answer

Asked 3 ´years ago

Question 47

hello I own a r6 05 model which has this box on it I would like to add a quickshift what would I need and do you still carry the set up THANKS View answer

Asked 3 ´years ago

Question 48

what is the leading difference between the power vision black series?.. and the Power vision 3?i can only see the difference of the 2 screens, and what can be shown on them. is there ANY difference in the flashing abilities of these 2 tuners?... thank you for your time. View answer

Asked 3 ´years ago | Power Vision 3 for 2001-2017 Harley-Davidson J1850 ECU

Question 49

Thrashin Supply makes an EZ Shift Lever for my 2022 Road Glide Special which improves the leverage by 25% making it easier to shift gears and find neutral. Is there an issue (advantage or disadvantage) with installing both of these parts (EZ lever and QuickShift) on my bike? View answer

Asked 3 ´years ago

Question 50

I have put the Cobra 6 into 6 Drag pipes on my 1998 Honda Valkyrie. It was recommended that I buy/install the appropriate jet kit for this new more free flowing exhaust. I am looking for the Jet Kit that Cobra recommended. View answer

Asked 3 ´years ago

Browse by Topic