Question 1

I have a PV-1B. will firmware update, new license, and this cable let it communicate with my 2021 low rider s View answer

Asked 2 ´years ago

Question 2

Can you use the 2510C on a 2023 outlander? Or does it have to be the 25?10 View answer

Asked 2 ´years ago | Power Vision 3 for Can-Am Outlander

Question 3

does pv eliminates de 2 extra o2 sensors that newer harleys bring? im looking for a 2:1 exhaust that only has the normal 2, not 4 bungs... View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 4

Do this work for a 2021 iron 1200 ? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 5

2002 honda shadow sabre with cobra dragster exhaust. The stock vt1100's run a main in the rear cylinder carb thats richer than the front cylinder carb. But it appears the instruction say to run the same size mains in both carbs. Am I understanding the instructions correctly? Please advise. Thank you! View answer

Asked 4 ´years ago

Question 6

I would like to have the assembly instructions as for the power command V. Thanks View answer

Asked 2 ´years ago

Question 7

I bought this pv4 tuner and when you load the app or check on here it says no tunes available? Why did i buy a tuner that has no tunes available? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 8

Re: PCV #15-021 plus AT-101B Autotune (HD Softail)Please clarify: the Autotune installation instructions have the kit's 18mm O2 sensors replacing the oem O2 sensors. However the PCV installation instructions (page 9) appear to say the eom O2 sensors are retained in addition to installing the Autosensor kit's 18mm O2 sensors. Which is correct? Thanks View answer

Asked 4 ´years ago

Question 9

Hi, I've found a used power commander V for klx 250, can I use it on the xt1200z from 2012, does the cabling changes, and if so it's available for sale? View answer

Asked 4 ´years ago

Question 10

Wll the jet kit for the 2005 yamaha yzf 600r (4145) work for a stock motor but no airbox (individual air filters?) View answer

Asked 2 ´years ago

Question 11

I have a HighBall 2016, does this fit it? It says it fits 09-15 and mine is 16? View answer

Asked 2 ´years ago

Question 12

Will this remove the factory speed limiter on a 2021 Harley Fatbob 114? Will this allow you to add more fuel to the mixture to prevent the factory lean condition? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 13

can i make a custom tune with this device? i have a Yamaha bike mt7 2019 and would like to raise the limiter and abd adjust the fuel and ignition tables View answer

Asked 4 ´years ago

Question 14

For a 2017 dr650 instructions say 170 main for aftermarket exhaust. People online are using 160. View answer

Asked 2 ´years ago

Question 15

Good afternoon My AK M800 SP 2013 has PCV installed, the firmware is standard, and a full slp exhaust is also installed. I can?t find the firmware for this exhaust, will installing autotune help me to adjust the fuel mixture and eliminate dips at low speeds? Thank you. View answer

Asked 2 ´years ago

Question 16

I have an aftermarket full system exhaust and removed the 02 sensor. Will this dynojet adjust to those specifications? View answer

Asked 4 ´years ago

Question 17

Is The power commander 2018 compatible with 2020? please View answer

Asked 4 ´years ago

Question 18

I currently have the V&H FP3 on my bike, I am wanting to ditch it the problem is I use the sensor readouts as my instruments due to my handlebars blocking my speedo/tach.does the PV4 give you information such as speed, rpm, oil temp etc. on the screen? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 19

Does this come with any sort of mount to attach it to the handle bars? View answer

Asked 4 ´years ago | Power Vision 3 for Can-Am Outlander

Question 20

Has this been tested and successfully used on the Sportster S RH1250S? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 21

Will this work with a 2013 Road Glide 103? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 22

I have 2013 HD switchback, with a Samson 1 into 1 exhaust and S&S air cleaner. I will be adding a Woods 222 cam to the bike, what would be the best tuner with auto tune for this application View answer

Asked 2 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 23

Hi, does the AutoTune work on the Husqvarna SM450R 2010 model. I do have a Power Commander V installed on the bike. Is the AutoTune plug and play or do I need to send the bike to the Tuner after installation for the bike to run well? View answer

Asked 4 ´years ago

Question 24

Will the PV4 fit my 2023 scout bobber sixty? View answer

Asked 2 ´years ago

Question 25

If i buy this one, is it include the wiring??Thanks View answer

Asked 4 ´years ago

Question 26

Hello, I have a 2012 883r sportster. I am going to install a set of cylinders, pistons and cylinder heads from a 1200 sportster. I will need to copy the mapping from a 1200 to install it in my 883. Is the power vision 1-b and a new license can allow me to do this? Thank you for your reply. View answer

Asked 4 ´years ago | Power Vision for Harley-Davidson Flash License

Question 27

Do you have CV carb jet kit for a 120" Jim's engine View answer

Asked 2 ´years ago

Question 28

I have a 2017 z650abs with aftermarket rearsets that uses a longer shift rod than stock, would it be recommended to purchase rod A? View answer

Asked 4 ´years ago

Question 29

Greetings, a ktm 790 adventure and I want a power commander and I don't know if it is compatible with the ktm 790 duke. Which one do you recommend? View answer

Asked 4 ´years ago

Question 30

Will this tune add power? View answer

Asked 4 ´years ago

Question 31

hello, i already have a powervision 3 for my fz 09, just want to know if i need a custom map to install a quickshifter or it's plug n play ? and is it a up and down quickshifter or just up ? thanks you ! Thomas View answer

Asked 4 ´years ago

Question 32

Will this work with the SE Smart Tune Pro? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 33

Does this work with the can am module for snow tracks? View answer

Asked 2 ´years ago

Question 34

I have PC5(29005)Will it not work on my 2022 Chief DH? View answer

Asked 4 ´years ago

Question 35

Will you be upgrading the system for Indian models, specifically the Challenger DH? View answer

Asked 4 ´years ago

Question 36

I have a 2020 Street Glide/FLHX and a 2023 Ultra Limited/FLHTK. If I am understanding correctly, I can use the same PV Black Series for both bikes with purchase of a second tune license and download it to the PV unit. I am planning on purchasing a PV Black Series for the 2020 Street Glide and using later on the 2023 Ultra Limited. If I am correct, I will need a different cable to hook up the PVBS to the 2023 Ultra Limited. Do you sell an adapter cable to do this? Thanks View answer

Asked 2 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 37

I have the PCV and expansion module. Where do I plug the shift sensor into? Do I also need the quick shift sensor and rod? 2006 cbr1000rr. View answer

Asked 4 ´years ago

Question 38

Is there a map built in for an ultra limited 2024 114 with full exhaust and a 30/30 screaming eagle cam? Or would that be an additional cost? View answer

Asked 2 ´years ago | Power Vision 4 for 2021-2024 Harley Davidson

Question 39

Will this fit the 2022 KLX 300r model? I see in the description it says 2020-2021 View answer

Asked 4 ´years ago

Question 40

I didn't realize when I bought it that my header pipes don't leave anough room for 2 o2 sensors. Can I still use this as a single channel? View answer

Asked 4 ´years ago

Question 41

I originally purchased the power vision and tuned my 03 roadking that had motor work?.. now I want to to tune my 21 RGS I want to make sure I understand, do I only have to buy the License and I?m good after that right. But Hd one then plug device to my bike then plug it back to my computer then go plug back to device to load it correct? View answer

Asked 4 ´years ago | Power Vision for Harley-Davidson Flash License

Question 42

Does the Power Vision 4 have an auto tune mode/feature or is this only available in the PV3 model? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 43

Is the PV 4 strictly bluetooth or is there an option to custom tune via computer? View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 44

i need some one from the sales team to chat with me my mail is / mohamedyossef 62 @gmail.com ph.num / 971561188779 View answer

Asked 2 ´years ago

Question 45

I have a screaming eagle stage 2 torque cam and Vance and Hines slip on's. My bike was flashed with a Screaming Eagle tuner. Can I reflash with the Power Vision and will it make any difference with power than the Screaming Eagle tuner? Thanks View answer

Asked 4 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 46

Hello,I'm wondering if it's possible to alleviate the jerky on/off throttle issue that's plaguing the CRF300L with the Power Vision 3? View answer

Asked 4 ´years ago

Question 47

what is the price ?i need quotation ? View answer

Asked 2 ´years ago

Question 48

I can't find Year: 2016-2017, Model: SOFTAIL, Engine: 103 , , Stage 3, Full Exhaust, High Flow Intake. View answer

Asked 4 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 49

Will this work on a 2022 Scout bobber? View answer

Asked 4 ´years ago

Question 50

My sons recon has a slip on hmf pipe with a k&n filter I was told by hmf employer to go with the 105 jet and the bike backfires quite a bit so I went with the 110 still same issue I checked the spark plug it is white So I know it is burning lean so I am up to suggestions as what to do at this point does it need a bigger jet and if so do yall have bigger than a 110 jet View answer

Asked 4 ´years ago

Browse by Topic