Question 1

Hi, I have the 690 Enduro R, 2021 EU model (Euro 5) with Rade Garage filter and intake plus the the Wings muffler and the Powercommander 5 using the 18-030-003.1 Map (the map has ktm 690, 2019 in its notes) from your website. No other dongle or mod is made. It does not run well under acceleration full throttle where it hits a spot on the higher revs where the engine abruptly loose power before it may pick up power and continue to rev up. I have seen statement on forums that the PC5 would not work on EUR5 models 690. Could you verify that this hardware and map should work fine? All connectors matched perfectly. View answer

Asked 3 ´years ago

Question 2

When would this be available for Honda CB650RA 2021? View answer

Asked 3 ´years ago

Question 3

Why does the PV 4 show compatible for the 2021 FLHTK (Ultra Limited) but the 2021 FLTRK (Road Glide Limited) is not listed. Don't they have the same exact engine? View answer

Asked 3 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 4

What is the amp draw of this system when used with your dual output 3 ohm ignition coils? I'm converting to lithium battery and LED lighting. View answer

Asked 2 ´years ago

Question 5

"This product FITS your Kawasaki ZR900 Z900 ABS 2022" but the title says 17-21 and then to make matters worse the description says 17-19.Will this work for my 2022 Z900 yes or no? View answer

Asked 3 ´years ago

Question 6

Hi,Im interesting in your module, i got only akrapovic slipon, rest of bike are standard. Can i use your map or i have to take my bike for dyno, and tuning.Do you have dyno graph crf1100 with your map? View answer

Asked 4 ´years ago

Question 7

I?m looking for the mount for the power vision 3 for the 2023 Grom. This picture looks like the wrong size. If it?s not the right one could you point me he right direction? View answer

Asked 2 ´years ago

Question 8

Does it have a quick disconnect? For theft reasons. View answer

Asked 3 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 9

Does this tuner do away with the speed limiter on the 2023 low rider s mine cuts out at 120 and I would love to have more than that View answer

Asked 1 ´year ago | Power Vision 4 for 2021 Harley Davidson

Question 10

Does this filer require a tuner or some other time of mod or can it just be installed by itself? View answer

Asked 4 ´years ago

Question 11

Does this work with a can am xmr 650 2022 View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 12

I just got a 1975 BMW R90/6 that has a Dyna III electronic ignition. Should I use a spark plug with a resistor, or are the no-resistor Bosch plugs that are usually installed on this bike okay? I read somewhere that no-resistor plugs can damage the electronic ignition. Thanks. View answer

Asked 3 ´years ago

Question 13

Will this fit my 2009 Can am Renegade 500 and i have an HMF Slip on exhaust? Please let me know as soon as you can thank you very much. View answer

Asked 3 ´years ago

Question 14

Do you have coil packs that fit a 2021 Polaris ProXP? If so could they be wired into a 2018 Polaris XP Turbo wiring harness? We blew up a race motor and got a 2021 ProXP motor to replace the original and we were told that we could get coilpacks that would work for this situation. Thanks in advance. View answer

Asked 3 ´years ago

Question 15

Hello,Is there existing a video how to work with the WBCX SINGLE CHANNEL AFR KIT FOR POLARIS UTV'S - USE WITH POWER VISION ? View answer

Asked 2 ´years ago

Question 16

Will this work on newer GT650 models, or is there an updated version in the works? I?m looking to tune my 2022 model. View answer

Asked 2 ´years ago

Question 17

I have a 2020 Street Glide/FLHX and a 2023 Ultra Limited/FLHTK. If I am understanding correctly, I can use the same PV Black Series for both bikes with purchase of a second tune license and download it to the PV unit. I am planning on purchasing a PV Black Series for the 2020 Street Glide and using later on the 2023 Ultra Limited. If I am correct, I will need a different cable to hook up the PVBS to the 2023 Ultra Limited. Do you sell an adapter cable to do this? Thanks View answer

Asked 1 ´year ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 18

Does this work with RH1250S Sportster S? If not, is there any other product you guys have that can tune the bike? View answer

Asked 2 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 19

Will it work with the new can am 2022 xmr 570 because it has itc View answer

Asked 4 ´years ago | Power Vision 3 for Can-Am Outlander

Question 20

I just bought a PV3-17-01 3.20 kawa1000 tuner. I have a 2020 Krx. I would like a tune that just removes the throttle restriction and lowers the coolant temps. As for the octane i would like to stay the same and I don't need the timing advanced. I do how ever have a slip on muffler and I don't want it popping. View answer

Asked 3 ´years ago

Question 21

Does this unit make it possible to remove 02 sensors from the system? Or will new exhausts have to be made to compensate for the new 02 sensor on the rear muffler? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 22

Can you change the bike it's idle with this device without whipping the ECU's current modified flash? View answer

Asked 4 ´years ago

Question 23

Hello Dynatek, i am looking for the correct igntion system for my bike (Harley davidson, softail Nostalgia, 1994 carb, ) i have been told that the nose cone part i need is the 2101-0027 part number, 2000i 1986-2003, but i am unsure which coil i need? if you could point me in the right direction i would be very grateful, i am looking for a single fire coil that i can mount in the original coil position on the softail. many thanks Simon. View answer

Asked 3 ´years ago

Question 24

What is the difference between a Strategy 27 & Strategy 28 tune? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 25

does this unit displays the speed as the motorcycle speedometer ? View answer

Asked 2 ´years ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 26

Will this work with CDI ignition systems? View answer

Asked 4 ´years ago

Question 27

Is this compatible with the PV4? View answer

Asked 3 ´years ago | Target Tune Full Kit for Harley-Davidson Touring / Trike Models

Question 28

Hi, does the PC6 support both fuel and ignition timing curve change for the Yamaha FZ1000 (2012) model . Also is it backward compatible to the QS shifters that work with PC5 View answer

Asked 2 ´years ago

Question 29

I have a stock 2020 Maverick Trail 800. Will this tuner add hp without any bolt on parts? View answer

Asked 3 ´years ago

Question 30

Any plans to release one for bikes equipped with software 27? I?ve been waiting for this to release, was stoked until realizing my bike was a 27. View answer

Asked 3 ´years ago

Question 31

Do I need PV Tuning Licence if I have PV installed on my S&S 128ci 550cam Tri-Glide and want to dyno tune it? View answer

Asked 3 ´years ago | Harley-Davidson Power Vision Delphi CAN ECU Black

Question 32

Hello!I bought Power Comander V (sn.190301001508 PN22-042) for Yamaha XVS1300CU (2015). I have question about O2 sensor. I need or not to need O2 sensor eliminator? I have Vance & Hines Twin slash staggered (exhaust) and Stock air filter. I download map 22-042-002 this map work with O2 sensor eliminator or not?Thanks for answer and nice day! View answer

Asked 6 ´years ago

Question 33

Does the PV3 automatically come with the 2 basic tunes for a stock and aftermarket exhaust or do we have to download on ourselves? View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 34

Is there a way to see what maps are available? And what air cleaner and pipes are covered View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 35

Hi I got a stage 7 Kit for Yamaha V Max 1200, but the Kand N filter not yet arrived, can I set up stage 3 ?

Asked 1 ´month ago | Jet Kit for 1985-2007 Yamaha V-Max

Question 36

What is the difference between the two Dyna 2000 digital igntion for 1979-1983 HONDA CB750/900/1100? SKU #DDK1-5SKU #DDK1-5C View answer

Asked 2 ´years ago

Question 37

is the power vision 4 limited capabilties on the 2023 ecm ,because its showing fitment for the 2021

Asked 1 ´month ago | Power Vision 4 for 2021 Harley Davidson

Question 38

Hey I was wondering how to order a stage 7 kit

Asked 1 ´month ago | Jet Kit for 1983-1985 Honda VT500F

Question 39

Will this work with a 2022 ultra limited View answer

Asked 3 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 40

I did not see 2013 cvo breakout

Asked 1 ´month ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 41

How many different tunes are available and what's the performance gain? View answer

Asked 2 ´years ago

Question 42

Will this tool work for a 2021 X3 DS Turbo 120hp model? View answer

Asked 1 ´month ago | Primary Clutch Sensitivity Adjustment Tool for Can-Am

Question 43

Do I need to buy a flash license as well to use this? View answer

Asked 1 ´month ago | Power Vision 4 for 2023.5+ Harley-Davidson G26 ECU

Question 44

Hello,Is there a specific tune for a 2021 Harley Davidson Low Rider S (FXLRS) with a stock Air Intake and a TBR 2-1 Shorty Turnout Exhaust? If so, which one and if not, do you need a custom tune? View answer

Asked 4 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 45

Hello,I've installed the PC5 on my Yamaha R6RJ11 and also fitted the QEM15. Now I installed the push/pull sensor but I can't seem to connect the shifter with the QEM. I have 2 pairs of wires exiting the push-pull sensor (blue/green and Red/yellow). The QEM only has the blue/green output. Do I just ignore the yellow/red? There is not that much info besides "splice them". Is there any example?Thanks! View answer

Asked 3 ´years ago

Question 46

I want to add a cam later down the road. Will this work or should I go with the regular Power Vision? View answer

Asked 1 ´year ago | Power Vision 4 for 2021 Harley Davidson

Question 47

I recently purchased and installed the quick shifter on a 2004 YZF-R1 and it works perfectly but while messing with timing I noticed theres an option to cut spark or fuel. Is it possible to cut spark even though the power commander is only plugged into the fuel injectors? View answer

Asked 2 ´years ago

Question 48

Is this just the stage 1 kit or all of them

Asked 1 ´month ago | ATV Jet Kit for 2003-2007 Polaris Predator 500

Question 49

Will this be compatible with target tune and wideband? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 50

With the new FTC ruling, buying this no longer voids my Harley-Davidson factory warranty? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Browse by Topic