Question 1

Will this work on a 2023 850 xmr outlander ? Don?t know if the 2023 an 2022 are the same ecm View answer

Asked 3 ´years ago | Power Vision 3 for Can-Am Outlander

Question 2

Where do i find tunes for aftermarket pipes and snorkels View answer

Asked 1 ´year ago | Power Vision 3 for Can-Am Outlander

Question 3

Do you have to purchase the tuning license seperatly along with the purchase of the tuner or does the vision three come with the license View answer

Asked 2 ´years ago

Question 4

Hi dude, matched tune cannot be found in dynojet.com/pvtunes .C1503S104 is not in the page for my 117 lowrider s View answer

Asked 3 ´years ago | Power Vision 3 for 2021 Harley-Davidson MT22 ECU

Question 5

Is the power commander 3 for a 2005 gsxr 1000 compatible with a 2007 gsxr 600? View answer

Asked 2 ´years ago

Question 6

Hi, mostly interested because I might get a 180 or 200cc kit and bigger injector for it in the future. My questions - there seems to not be any maps related to bigger cc engines as downloads, will I be able to create a full map for these bigger cc's since I'm only limited to 15% adjustment in fuel? Or do I have to keep adding fuel and create a new map as base map until I get to were I need to be? Does the pc6 alow me to manipulate ignition timing? I know I can create a fuel compensation map off of a 0-5v analogue pressure sensor input in the manifold but can I xxxx timing well? The bike in question is a '11 yamaha yzf-r 125. View answer

Asked 1 ´year ago

Question 7

Est-ce que le shifter s'utilise en UP and DOWN ? View answer

Asked 2 ´years ago

Question 8

Will the POWER COMMANDER 6 FOR 2010-2020 HONDA FURY (VT1300) actually work for a 2011 Honda Fury the description shows Honda fury, but when you look it up by application it says that this product does not fit my application? Thank you for your time. View answer

Asked 3 ´years ago

Question 9

I have a 2022 Kawasaki H2. I don't believe Kawasaki has changed anything from 2020 to 2022 but would like to confirm this is the correct Power Commander for my bike.Thanks View answer

Asked 3 ´years ago

Question 10

will this tuner work with a 2023 harley nightster special rh975? View answer

Asked 2 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 11

Why is this product not available for purchase in the USA? Is it illegal in all of the USA or just California? View answer

Asked 5 ´years ago

Question 12

Any plans to release one for bikes equipped with software 27? I?ve been waiting for this to release, was stoked until realizing my bike was a 27. View answer

Asked 3 ´years ago

Question 13

IS IT PLUG AND PLAY View answer

Asked 3 ´years ago

Question 14

Hello!I bought Power Comander V (sn.190301001508 PN22-042) for Yamaha XVS1300CU (2015). I have question about O2 sensor. I need or not to need O2 sensor eliminator? I have Vance & Hines Twin slash staggered (exhaust) and Stock air filter. I download map 22-042-002 this map work with O2 sensor eliminator or not?Thanks for answer and nice day! View answer

Asked 6 ´years ago

Question 15

What size Jets come in the Klx 110 jet kit?? View answer

Asked 1 ´year ago | Jet Kit for 2010-2023 Kawasaki KLX110

Question 16

Does this work with a power commander 6 View answer

Asked 3 ´years ago

Question 17

will this fit inch and a half handlebars View answer

Asked 4 ´years ago

Question 18

Hi I got a stage 7 Kit for Yamaha V Max 1200, but the Kand N filter not yet arrived, can I set up stage 3 ?

Asked 1 ´month ago | Jet Kit for 1985-2007 Yamaha V-Max

Question 19

hello, i already have a powervision 3 for my fz 09, just want to know if i need a custom map to install a quickshifter or it's plug n play ? and is it a up and down quickshifter or just up ? thanks you ! Thomas View answer

Asked 3 ´years ago

Question 20

Will this work with the SE Smart Tune Pro? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 21

Your kit for the dr350. Are they forbike fitted with the mikuni slide carb? View answer

Asked 3 ´years ago

Question 22

Do you guys offer replacement wideband sensors? View answer

Asked 3 ´years ago

Question 23

Will this work on a 22 model? View answer

Asked 3 ´years ago

Question 24

Greetings, a ktm 790 adventure and I want a power commander and I don't know if it is compatible with the ktm 790 duke. Which one do you recommend? View answer

Asked 3 ´years ago

Question 25

Will this fit a 2020 Kawasaki Ninja 400 View answer

Asked 3 ´years ago

Question 26

dont seem to be much info on tunning , how would i get the correct tune for an 03 flhrci with a 1550 kit without a dyno ? thanks/ View answer

Asked 3 ´years ago

Question 27

Hello, it is now end of May 2022, i see below someone asked 7 months ago if you have a download set up for a Akrapovic full exhaust. is there one now available? View answer

Asked 3 ´years ago

Question 28

Hello! I am very interested in fitting a quick shifter on my Honda 2015 cbr650f. However, I am a little bit confused as to what I need to buy. Is the "Quick Shifter Dual Contact Sensor" all I need, or is there any other parts?Thank you! View answer

Asked 3 ´years ago

Question 29

I do not see my year and model for the PV4. I have a 2010 Ultra Classic. It was tuned years ago with a Power Vision from the previous owner and now I am looking to upgrade it. Also, any dates on gauges and autotune? View answer

Asked 3 ´years ago

Question 30

Will this tune add power? View answer

Asked 3 ´years ago

Question 31

Is this a stand alone unit for any application or is it for use with your programers only? Thanks View answer

Asked 3 ´years ago

Question 32

I have a stock 2021 canam maverick 1000r xrc I just order the dyno jet vision 3 for it I just want to make sure it will work on my all stock machine without upgrading anything else View answer

Asked 3 ´years ago

Question 33

Will this fit a 2013 super tenere View answer

Asked 3 ´years ago

Question 34

Will this fit on a 2022 MT07? the only product for 2022 model year is the power vision 3. I am getting a full exhaust system and intake. View answer

Asked 3 ´years ago

Question 35

Is there an ETA on when we can expect to start seeing additional functionality similar to previous models of PV on the PV4? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 36

WHERE CAN I FIND SOME MAPS FOR THIS THERE IS NONE ON YOUR WEBSITE THERE IS SOME FOR THE 300R BUT I DONT THINK THEY WILL WORK View answer

Asked 3 ´years ago

Question 37

will it fit a 2016 Polaris slingshot? View answer

Asked 3 ´years ago

Question 38

Hello. Does this also fits KTM 690 SMC R 2020? is there any difference between this and the power commander for the KTM 690 SMC? I am looking at buying a used Power commander from a 701 SM 2017 and fit it to my SMC 2020 View answer

Asked 3 ´years ago

Question 39

Do this work for a 2021 iron 1200 ? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 40

I have a 2017 z650abs with aftermarket rearsets that uses a longer shift rod than stock, would it be recommended to purchase rod A? View answer

Asked 3 ´years ago

Question 41

Not sure if there is a tune where this thing would work with an r4 exhuast View answer

Asked 3 ´years ago

Question 42

Hello, I have a 2012 883r sportster. I am going to install a set of cylinders, pistons and cylinder heads from a 1200 sportster. I will need to copy the mapping from a 1200 to install it in my 883. Is the power vision 1-b and a new license can allow me to do this? Thank you for your reply. View answer

Asked 3 ´years ago | Power Vision for Harley-Davidson Flash License

Question 43

2002 honda shadow sabre with cobra dragster exhaust. The stock vt1100's run a main in the rear cylinder carb thats richer than the front cylinder carb. But it appears the instruction say to run the same size mains in both carbs. Am I understanding the instructions correctly? Please advise. Thank you! View answer

Asked 3 ´years ago

Question 44

I have PC5(29005)Will it not work on my 2022 Chief DH? View answer

Asked 3 ´years ago

Question 45

Will you be upgrading the system for Indian models, specifically the Challenger DH? View answer

Asked 3 ´years ago

Question 46

2007 vulcan classic 1600 - installed PC 5 with Cobra Speedster longs and BIG AIR ENFERNO from BARONS. Do i need to get it dyno'd or the PC5 has already been activated? View answer

Asked 3 ´years ago

Question 47

I bought this pv4 tuner and when you load the app or check on here it says no tunes available? Why did i buy a tuner that has no tunes available? View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 48

if my rzr is tuned by a different tuner can i read the tune with my power vision 3 tuner View answer

Asked 3 ´years ago

Question 49

I have a 1993 Honda shadow 1100 and it has the dual carburetors will this kit jet both of the carburetors or just a single one. View answer

Asked 3 ´years ago

Question 50

If i buy this one, is it include the wiring??Thanks View answer

Asked 3 ´years ago

Browse by Topic