Question 1

Hello! I am very interested in fitting a quick shifter on my Honda 2015 cbr650f. However, I am a little bit confused as to what I need to buy. Is the "Quick Shifter Dual Contact Sensor" all I need, or is there any other parts?Thank you! View answer

Asked 3 ´years ago

Question 2

Just wondering if 1 kit has jets for both carbs or do I need 2 kits thanks

Asked 11 ´days ago | Jet Kit for 1988-1999 Yamaha Virago 1100

Question 3

Hello,The POWER VISION 3 AUTOTUNE KIT - HARLEY DAVIDSON 2011-2022 CAN ECU requires the Power Vision 3 to work as a autotune or it can be used without the Power Vision 3? View answer

Asked 2 ´years ago | PV3 Autotune Kit (with Bungs) for Harley-Davidson CAN ECU

Question 4

Does this have the ability to enable or disable System Switches?? i.e. Cruise Control View answer

Asked 3 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 5

I dont see austin racing full exhaust there. Do you guys do custom tunes if requested. View answer

Asked 4 ´years ago

Question 6

With the Dyna S is there a ignition module . Is there a requirement for the module View answer

Asked 3 ´years ago

Question 7

Would that fit the CB650R 2021 model? View answer

Asked 4 ´years ago

Question 8

I recently purchased clutch weights for my krx1000. And will be getting your tuner next week. Do you give discounts on this mounting bracket View answer

Asked 4 ´years ago

Question 9

What?s the difference between this and the Stage 2 kit? View answer

Asked 2 ´years ago

Question 10

hello i have a 2016 yamaha R1s with the Power Commander V.. i wanted to add a quickshifter! What all do i need to get? View answer

Asked 3 ´years ago

Question 11

Great looking product! I have a 15 SGS with a 131 and a Tmax for my turbo application. Can I use this shifter with my Tmax? View answer

Asked 2 ´years ago

Question 12

I'm looking for a kit to work with the stage 2 hot cams for a 2007 yz450f. Will this help me get the most power out of those cams. If not can you point me in the direction of a kit that will? View answer

Asked 2 ´years ago

Question 13

I have a 2009 ZX600 Kaw with a PCV, what parts do I require to run a Quick Shifter and what should be the approx shift delay in ms... The bike is for track use only...Thanks randalltrenholm@hotmail.com View answer

Asked 2 ´years ago

Question 14

Will the SFM work with Power Commander 6. View answer

Asked 2 ´years ago

Question 15

What type of gas do you have to use with this tube upgrade? Can you use 87 or do you have to you use premium gas like 89 or 91? View answer

Asked 3 ´years ago

Question 16

Just to verify, this kit has BOTH coils? View answer

Asked 4 ´years ago

Question 17

Hi there, would i need a new shift rod if i were to get this module with my 2016 R3? View answer

Asked 4 ´years ago

Question 18

So I have a "POWER VISION BLACK SERIES FOR ALL CAN ECM HARLEY-DAVIDSON MODELS" that I got for an old bike that was stolen, but never used it to flash that bike. With my new bike, which is a 2022 Lowrider ST, would this cable work with that controller and bike so that I can use the tuner with my new bike? View answer

Asked 3 ´years ago

Question 19

If i just bought the Msd blaster fi would buying a dyno v make a difference or do they both do the same function? View answer

Asked 3 ´years ago

Question 20

So I have a 2022 RGS, the power vision tuner the dealership installed on my bike is part number PV-3B. I am assuming that the ECM is the same on 21 and 22 models?? Because when I reached out to dynojet I was told I couldn?t do the target tune because it was a 22? but yet online is says the target tune is compatible with the 21 tuner that I have installed?? Help?? View answer

Asked 3 ´years ago | POWER VISION FOR 2021+ HARLEY-DAVIDSON

Question 21

How does this compare to Power Vision Black? PV-2B View answer

Asked 3 ´years ago | Power Vision 3 for 2011-2019 Harley-Davidson CAN ECU

Question 22

I have several Harley?s (7) actually. Is there a product I can purchase that can be used with a PC to tune several different bikes. View answer

Asked 2 ´years ago | Target Tune for Harley-Davidson J1850 ECU 52/10'' 2P

Question 23

I own a 2019 Tri Glide. It currently is associated with a Screaming Eagle tuner. I would like to switch to a Power Vision tuner to increase the performance of the bike. Does the Power Vision over ride the past tunes from the SE tuner? Can I just add the Power Vision tuner? View answer

Asked 2 ´years ago

Question 24

Would this kit pair still with a powerbomb fmf exhaust and muffler? Stock engine , Af, and air box View answer

Asked 2 ´years ago

Question 25

hello,how much mapping is there for the ktm 790 duke? my equipment, ixrace mk2, kn air filter, decat.Thank you View answer

Asked 4 ´years ago

Question 26

Dose the two wires from Dynojet QS go straight in to input one of pc6? View answer

Asked 3 ´years ago

Question 27

Hello! I have a cbr 1000rr Fireblade 2005 mod. I have the power commander V and I want this quick shifter. Do I need anything else or can I plug it into the power commander? View answer

Asked 3 ´years ago

Question 28

If I install the PowerCommander to a MT-09 SP: - The stock quick shifter will work or do I need yours quick shifter? - If the stock works, is there any install instructions? View answer

Asked 3 ´years ago

Question 29

2003 Yamaha r6 what parts will I need to install quick shifter? Ty much View answer

Asked 4 ´years ago

Question 30

can you use a mt/fz 07 tune on a r7 since they share the same engine? View answer

Asked 3 ´years ago

Question 31

Hello. Do You have also application for 2018 version ?Some sources says 12-018 is workable, but not on Your websiteThank You in advance for reply View answer

Asked 4 ´years ago

Question 32

Hi,Just bought the Power Commander V for my Honda CB1000R here in Finland, but the box did not include the O2 sensor. Do I need also O2 eliminator with Honda CB1000R (2011) and PC V? I?m considering on taking my Honda to Dyno Center once I?ve installed the PC V.I have in my setup SC-Project?s Oval exhaust with deCat pipe. Honda?s original lambda sensor is installed to the SC project?s decat pipe.Do you have a map for this setup? (Exhaust is this one: https://shop.sc-project.com/en-FI/2262_SCP-H01A-12-Oval-Muffler.htm)Best Regards,Teemu Niippa View answer

Asked 4 ´years ago

Question 33

I was looking for the install documentation for this kit. I do not see it anywhere and would like to read the instructions prior to purchasing. View answer

Asked 4 ´years ago

Question 34

It seems that my 2&3 module has failed. It's 3 months past warranty can I just buy that one module or must I buy the whole package. I'm running dyna coils also View answer

Asked 3 ´years ago

Question 35

Hello, will there be a power commander for the segway villain 1000cc utv? View answer

Asked 3 ´years ago

Question 36

Hello Dynatek, i am looking for the correct igntion system for my bike (Harley davidson, softail Nostalgia, 1994 carb, ) i have been told that the nose cone part i need is the 2101-0027 part number, 2000i 1986-2003, but i am unsure which coil i need? if you could point me in the right direction i would be very grateful, i am looking for a single fire coil that i can mount in the original coil position on the softail. many thanks Simon. View answer

Asked 3 ´years ago

Question 37

I ordered this for my Kawasaki mule 410 I want it to go faster I hope I ordered the right part can you please let me know View answer

Asked 3 ´years ago

Question 38

Ok so I have a 2021 Can Am Outlander Xmr 1000r. When looking through the compatible models, it only shows up to 2020. It shows compatibility with the 2021 Renegade Xmr 1000r. Will this work for my outlander? And if not can you tell me why it won't. I already have a PV3 . Thanks so much, you guys are truly awesome. View answer

Asked 3 ´years ago | Single Channel Wideband-PV3 Kit for Can-Am

Question 39

Can you please advise of the increased performance (HP/torque) for a Kawasaki Versys x300? Maybe a dyno chart or map? View answer

Asked 4 ´years ago

Question 40

is this a turbocharging kit View answer

Asked 4 ´years ago

Question 41

I can't find Year: 2016-2017, Model: SOFTAIL, Engine: 103 , , Stage 3, Full Exhaust, High Flow Intake. View answer

Asked 3 ´years ago | Power Vision 4 for 2011-2020 Harley Davidson

Question 42

can you turn off traction control for the ryker 600ace it almost makes me loose control doing the opposite its saposed to i hate it View answer

Asked 2 ´years ago

Question 43

Why don?t these fit 2023 bikes? Did Harley change the connector or is the dynojet website not updated yet? View answer

Asked 3 ´years ago | Power Vision 4 for 2021 Harley Davidson

Question 44

Can you enable/disable system switches, such as enabling or disabling cruise control? View answer

Asked 3 ´years ago

Question 45

I see my configuration in tunes 2904002 & 2904004. What is the difference between these two tunes? Also, I DO NOT have the baffle in my S&S. That said, which tune should I use to start? View answer

Asked 3 ´years ago

Question 46

can a TT be added to this View answer

Asked 2 ´years ago | PV3 Autotune Kit (with Bungs) for Harley-Davidson CAN ECU

Question 47

Hello,On my 2010 XL1200C, does the Power Vision have to stay on the bike in order to use Target Tune?Thank you View answer

Asked 4 ´years ago | Target Tune for Harley-Davidson J1850 ECU 52/10'' 2P

Question 48

Can I also use a PV3-16-01 (instead of PV3-16-02) also for my Honda Monkey 2019? View answer

Asked 2 ´years ago

Question 49

What hp gains will I get with this power commander ??? View answer

Asked 4 ´years ago

Question 50

Hi, I have the Dyna-S ignition installed for 5 years on my MotoGuzzi V65 combined with the original coils (Motoplat). I am very happy with the operation. If you wanted to change the original coils by fitting Dynatek coils which are the best coils for this ignition? Thank you! View answer

Asked 3 ´years ago

Browse by Topic